boubouexpress
About
- Username
- boubouexpress
- Joined
- Visits
- 104
- Last Active
- Roles
- Member
Comments
-
everything is working
-
My firmeware marlin 1.1.0-RC7 works I took the same parameter firmware repetier
-
helloif I'm already home the G28 fails
-
I am sorry my Englishnot explain well why the same configuration works perfectly 0.91 and not with 0.92except G33 for 0.91 for me it is the g131et 132 g S1 does not work in 0.92
-
i position the endstop perfectly equal to the plate M321G28G131G132 S1g32 S2 G33 perfect impression tray test where does the calibration problem of the plate 10 mm
-
toujour the same bad calibration problem10 mm plate more than 5 mm gap endstop sur x, y m321g28g1 z10g131m99 x, y, zg132 s1
-
hellodelta radds + endstop max mechanical limit control with LED and Z mini kit frs // ################ Endstop configuration ##################### #define ENDSTOP_PULLUP_X_MIN true#define ENDSTOP_X_MIN_INVERTING false#define MIN_HARDWARE_ENDSTOP_X…
-
video
-
I despairalways the problem with version 0.92 no problem version 0.91
-
error M321G28G1 Z150G131M99 X0M99 Y0M99 Z0G132 S1 "should have all rods match same height as measured with rod, right?" ??? right
-
delta RADDS driver stepper 128 nema 17 400 stepsZ length 572 Horizontal radius when centered 187.38 Max. horizontal radius 110 Correction radius 70 X,Y,Z axis stepper motor Resolution 1280 firmware 0.92.9 M502M321G28G1 Z150G131M99 X0 (calibration…
-
hello no opinion on the issue I still modify the firmware with repetier tool and toujour the same problem except with 0.91 help
-
repetier firmware Z axis stepper motor Max travel speed 2 (#define MAX_FEEDRATE_Z)Homing speed 2 (#define HOMING_FEEDRATE_Z)travel acceleration 100 (#define MAX_TRAVEL_ACCELERATION_UNITS_PER_SQ_SECOND_Z)print acceleration 100 (#define MAX_ACCELERATI…
-
après M502M321G28G1 Z150G131M99 X0 (calibration rod)M99 Y0 (calibration rod)M99 Z0 (calibration rod)G131G132 S1 chariot X et Y à 20mm de la butéeChariot Z contacts butée
-
perform different configuration like to login to understand Extruder cooler pin = fan hotend Print cooling fan pin = fan filament Print second fan pin = option pour fan extruder Thermo Coupled Fan Pin = fan hotend for setting option from the hote…
-
hello I have disable Enable axis compensation (requires z-probing enabled, even without z-probe available)
-
M502M321G28G1 Z150G131M99 x0 "freelance calibration"M99 Y0 "freelance calibration"M99 Z0 "freelance calibration"G132 S1 " X and Y different position Z " ???
-
Hello the same problem with my Delta I commend old version it work ??
-
-
-
hello my Z probe walk thank you just change "#define Z_PROBE_ON_HIGH 0" Here the configuration// #################### Z-Probing ##################### #define FEATURE_Z_PROBE 1#define Z_PROBE_BED_DISTANCE 5#define Z_PROBE_PIN ORIG_Z_MIN_PIN#define …
-
Hello Coordinate Problem solved. the new problem he performs the test on the 3 coordinates email it does not touch the bed. M119 to see if it passes. L and should show when triggered H. "Inverted for me"
-
Résultat de commande G32 113:10:15.084 : N105 G32 *6013:10:15.084 : ok 10513:10:16.634 : N106 M105 *013:10:19.705 : N107 M105 *113:10:22.765 : N108 M105 *1413:10:25.816 : N109 M105 *1513:10:28.882 : N110 M105 *713:10:31.933 : N111 M105 *613:10:32.0…
-
13:19:55.504 : N52 M119 *6113:19:55.504 : endstops hit: x_max:H y_max:H z_max:H Z-probe state:H13:19:55.504 : Echo:N52 M11913:19:58.035 : N53 M105 *4913:19:58.035 : Echo:N53 M10513:20:01.096 : N54 M105 *5413:20:01.096 : Echo:N54 M10513:20:04.157 : …
-