gurry
About
- Username
- gurry
- Joined
- Visits
- 6
- Last Active
- Roles
- Member
Comments
-
Repetier said: It is by default and only exists since 1.4.10. What board and server version are you using? Would be easier instead of speculating from my side. That board in question is mainly used in Prusa MK3. If you have it you must have …
-
it is indeed a Prusa MK3s with an Einsy Rambo board. At the moment I'm on Server ver. 1.4.9.
-
Is there a possibility to uncheck this checkbox?
-
Ok, if I cover Pin 1 then I have no connection at all... and there is no jumper on my mainboard... The curious thing is, that I had no problems in sooner repetier versions...
-
I will give this a try... the curious thing is, after I reboot the server it shows as disconnected... when I power on the printer then the status is connected but after I power off the printer, it shows again as still connected till I reboot the ser…
-
The server is still running and the server is the problem... the server shows it still running/online/connected.
-
Hi, sorry for the late reply. I think I have found the problem, but don't know how to solve it. The problem is, that Repetier Server 1.4.9 "think" my printer is still connected, even though the printer is off. Any suggestions?
-
Repetier said: Regarding conditionText it is falsely returned Ready even if printer is offline. Will also be fixed in next release. The online variable in state/basics gets set 0 correctly, but the computation of the conditionText we added to…
-
Sorry for the late reply but I needed some time for testing. I testet the same gcode with RS 1.2.1 and with octoprint and the curious thing is... it was the wrong height with both of them too now but I have some prints from octoprint before I change…
-
Was quite some work but for you it has to be a lot harder getting the code done correctly. Everyone who can write codes and creating software has my respect and appreciation. For everyone who want to know how to add the states: Go to your File edi…
-
Ok, I managed to get it running. Added the sensors in the sensor.yaml file. It was alot of try and error but now it is working. Thanks for your patience.
-
Here are the pictures: https://i.imgur.com/Cv3JarG.jpg https://i.imgur.com/6XuxBVe.jpg https://i.imgur.com/fz4MksJ.jpg https://i.imgur.com/qvCtkrX.jpg And here the complete yml definition: type: vertical-stacktitle: *****cards: - type: condition…
-
Is it possible to send you some pictures? Maybe through Telegram or WhatsApp? Because my mainproblem is still that the entities for temp set are missing. ETAETEJobJob ThumbnailLayerPrintingPrinting TimeProgressStatusZBed 1 temperatureExtruder 1 tem…
-
Repetier said: You can integrate anything available in MQTT including set temperature. For temperature set there are already predefined entities. Same entity name like temperature just instead of ..._ext_temp_0 you write ..._ext_temp_set0 to …
-
Ok, couldn't find it, I will look again tonight. Thank you.
-
Hmm... this option was activated all the time but yesterday it wasn't working... today it was after another test. One more question: Is it possible to integrade "Temperature Set" for Bed and Extruder?
-
I just realized that the buttons (stop, pause, resume) doesn't work either.
-
Sounds good. I thought that I just did something wrong. thank you for your quick reply.
-
It was "Knutwurst" and i have that one on my I3. I'm also using a cfw for my vyper. The vyper also use TMC2208 from stock, so I think this would be a problem too then... I just think it's better to have everything from repetier, firmware and server,…
-
Repetier said: Just go in Home Assistant to settings and check core version if there is an update available. I have a translated version so links in english are different, but for me it is the first entry in settings. Current version is 202…
-
Sounds good. I'm sorry if this is a dumb question but I'm totally new to repetier server and home assistant: how do I update to the latest plugin version?null
-
Is there somewhere a v1.2.0 PI Image I can download for testing? Because with the v1.2.1 I can't even integrade it in Home Assistant. Or could someone provide a Link to the Image? Kind regards, Gurry