lrt10851
About
- Username
- lrt10851
- Joined
- Visits
- 4
- Last Active
- Roles
- Member
Comments
-
Thank you!! of course it was the scripts that caused the problems!My whole configuration was based on someone elses who has the same printer model.In hindsight it would have been faster to start my own configuration from scratch... Homing now works…
-
Ok, maybe I am a step further:after setting "#define MAX_HARDWARE_ENDSTOP_Z" from true to false the reset/crash does not occur anymore. Instead I get this reaction when homing (all or just z):- x homes - y homes- moves to defined x/y position for z-…
-
I have already changed homing to xytz - you suggested this earlier. Z-homing currently first homes x, then y, moves to the defined x/y coordinates for z-homing and then stops or more accurately resets...
-
Z does not move during homing, when Z_Probe is active.With "FEATURE_Z_PROBE 0", Z-homing works without a problem - therefore I do not think the stepper frequency is an issue here.I can also move Z 'manually' using the position menu. M119 works:endst…
-
Thank you, that helped (a bit). When homing x or y, I get a useful answer, for example: busy:processingX:0.00 Y:0.00 Z:0.000 E:0.0000X:0.00 Y:0.00 Z:0.000 E:0.0000wait When I home Z, I seem to get a crash or more correctly a watchdog reset: waitbu…
-
Yes, with z-probe disabled homing works. Ok, that at least explains the z_min not working. I will try the suggested homing order with temperature, even though probe activation is not the problem (at least from the hardware side) Can I see the state …