› ›

The temperature does not rise

mekanikbotmekanikbot
in Extruder & Bed
I am running the command of M109 S180
After 130C temperature increase is slowing down.
and it remains constant at 150 ° C.
180C 'had not reached

Thank you

Comments

  • RepetierRepetier
    Check in host/server the output power. I guess you have limited max. PWM to a value < 255 and this prevents the power needed to heat it further.
  • mekanikbotmekanikbot
    How do I upgrade power limit?

  • mekanikbotmekanikbot
    power value 255.
      What else could be the problem?

  • mekanikbotmekanikbot
    12 V 20.8A güç kaynağı

    fanı çalıştıran
    Sıcaklık hızla düşüyor

    fan kapalı olduğunda
    sıcaklık istenilen değere ulaştığında

  • mekanikbotmekanikbot
    12 V 20.8A güç kaynağı

    fanı çalıştıran
    Sıcaklık hızla düşüyor

    fan kapalı olduğunda
    sıcaklık istenilen değere ulaştığında


  • mekanikbotmekanikbot
    12 V 20.8A power supply

    the fan is running,
    Temperature falling rapidly

    When the fan off by
    temperature reaches the desired value


  • mekanikbotmekanikbot

    I wrote it wrong


  • RepetierRepetier
    There are 2 max pwm values. If you really see 100% in host temperature then your heater is too weak. Fan cools more then you can heat. Normally this is not the case for full metal hotends that need extra cooling and it is the pwm. Also check eeprom values.
Sign In or Register to comment.