› ›

no va hacia el lado correcto al presionar boton hogar

lucianoluciano
in General
Hi I have a NEO 3d printer, the extruder does not go to the start when I press the home button, it goes the other way. In the "manual control" screen, x-00 and-00 z-00, I don't know if it is a problem with the firmware or configuration of eeprom. I need help. Thank you.

Comments

  • RepetierRepetier
    After homing send M114 and check in log what firmware thinks where it is. Then you know if you need to change homing position in host configuration or if firmware is wrong.
  • lucianoluciano
    gracias por responder, como lo hago? no se como.
  • lucianoluciano
    13:41:19.579 : N69 M114*24
    13:41:19.583 : ok 69
    13:41:19.583 : X:0.00 Y:0.00 Z:0.00 E:0.00


  • RepetierRepetier
    No idea what you ask, wrong language. But if that was after homing your home position is 0, 0 ,0.
  • lucianoluciano
    no se usar bien el programa, ese comando que me pasas lo peque en el repetier host, en la solapa g-code y me devolvió eso que te pase , no se si esta bien ejecutarlo ahi al comando, el extrusor se va a la derecha y quiere seguir mas, cuando pongo el boton de home, tambien puse el comando #define INVERT_E0_DIR true y no hace nada, sigue sin ir al inicio.
  • lucianoluciano
    como cambio la posision del host?
Sign In or Register to comment.