Problem with swapping E0 for E1 (TEVO TARANTULA MARLIN 1.1.x)

Comments

• RAyWB

  May 2018 edited May 2018

  If you want To replace E0 by E1 to make E1 work as E0 just swap the numbers.

  
  

  so there shoul be :

  
  

  #define E1_STEP_PIN 26

  #define E1_DIR_PIN 28

  #define E1_ENABLE_PIN 24

  #define E1_CS_PIN 42

  
  

  and

  
  

  #define E0_STEP_PIN 36
  

  #define E0_DIR_PIN 34
  

  #define E0_ENABLE_PIN 30

  #define E0_CS_PIN 44

  
  

  Just swapping numbers of CS doesnt help
  

  
  
  
  
  
• Googoogoogoose

  May 2018

  RAyWB said:

  If you want To replace E0 by E1 to make E1 work as E0 just swap the numbers.

  
  

  so there shoul be :

  
  

  #define E1_STEP_PIN 26

  #define E1_DIR_PIN 28

  #define E1_ENABLE_PIN 24

  #define E1_CS_PIN 42

  
  

  and

  
  

  #define E0_STEP_PIN 36
  

  #define E0_DIR_PIN 34
  

  #define E0_ENABLE_PIN 30

  #define E0_CS_PIN 44

  
  

  Just swapping numbers of CS doesnt help
  

  
  
  
  
  

  On the picture above the pins are already swapped
• shearder

  January 2019

  Just swap the wires on the board