G32 end up with a hard Reset
Hi !
I need to Level my bed so I just make G28 followed by G32. The Bed comes up, the head moves to the left front corner and then nothing happens. After one second of waiting the printer (SparkCube XL) makes a hard Reset.
Did I miss something for G32? I tried it with the latest 1.0.1 Firmware.
The Log says "17:50:38.064: Info:Watchdog Reset"
regards
Dominik
I need to Level my bed so I just make G28 followed by G32. The Bed comes up, the head moves to the left front corner and then nothing happens. After one second of waiting the printer (SparkCube XL) makes a hard Reset.
Did I miss something for G32? I tried it with the latest 1.0.1 Firmware.
The Log says "17:50:38.064: Info:Watchdog Reset"
regards
Dominik
Comments
After removing that all works fine.
Domninik
Can you help me I have the same problem with my sparkcube xl
16:25:25.924 : Printer reset detected - initalizing
16:25:25.924 : start
16:25:25.924 : Info:Watchdog Reset
16:25:25.928 : Detected EEPROM version:18
16:25:25.936 : Transformation matrix: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000
16:25:28.594 : Free RAM:76724
16:25:28.594 : SelectExtruder:0
16:25:28.615 : FIRMWARE_NAME:Repetier_1.0.1 COMPILED:Feb 20 2018 FIRMWARE_URL:[github.com] PROTOCOL_VERSION:1.0 MACHINE_TYPE:Core_XY EXTRUDER_COUNT:1 REPETIER_PROTOCOL:3
16:25:28.615 : Cap : PROGRESS:1
16:25:28.619 : Cap : AUTOREPORT_TEMP:1
16:25:28.619 : Cap : EEPROM:1
16:25:28.619 : Cap :AUTOLEVEL:1
16:25:28.622 : Cap :Z_PROBE:1
16:25:28.623 : Cap : SOFTWARE_POWER:0
16:25:28.627 : Cap : TOGGLE_LIGHTS:0
16:25:28.627 : Cap : PAUSESTOP:1
16:25:28.627 : Cap : PREHEAT:1
16:25:28.635 : Printed filament:0.52m Printing time:0 days 0 hours 20 min
16:25:28.635 : PrinterMode:FFF
16:25:28.642 : X:0.00 Y:0.00 Z:0.000 E:0.0000
16:25:28.643 : DebugLevel:6
16:25:28.644 : SelectExtruder:0
16:25:28.648 : Begin file list
16:25:28.648 : End file list
16:25:28.656 : DebugLevel:6
16:25:28.656 : SelectExtruder:0
regards
Jadullah