Repetier config for Kossel Mini (for Kossel Mini users only)

Skyjir

Hello all,

Iam new in 3D (probably read it one houndred times...)
and i have Kossel Mini  http://reprap.org/wiki/Kossel
sadly with original Marlin firmware configuration and I would like to update it with repetier.

Iam not very technical person and due to my poor english skills I have found problem to get thourg the repetier firmware configuration tool. In my marlin config. instead of values there are mathematical equations or completely missing definition.
exmpl.
#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)
delta_floor _safety_margin_mm is not there...

Long story short.
Can you pls someone send me working repetier config for Kossel Mini which I would use as a template?

Danila

Hi, I'm using Anicubic Kossel Plus.

My configuration It works fine
https://drive.google.com/file/d/0By44gyE9bWSLUFdPWFVCUURfNnc/view?usp=sharing

But my printer is more than yours, you must account for the maximum height of your printer 300 and the maximum diameter of 230

Be careful with these parameters

#define X_MAX_LENGTH 200

#define Y_MAX_LENGTH 200

#define Z_MAX_LENGTH 300

#define DELTA_MAX_RADIUS 116

#define ROD_RADIUS 135.4

#define PRINTER_RADIUS 135.4