Repetier-Forum
  • Categories
  • Discussions
  • About Us
  • Privacy Policy
  • Sign In
Home › Search
  1. @execute command not running before job

    Repetier
    by Repetier · August 2023
    See with eye symbol what the error message for failed is. Maybe it is the ffmpeg that is having issues especially if I see it starts converting.
  2. Repetier Server goes randomly to Pause

    Repetier
    by Repetier · July 2023
    You need to enable logging and check what happens to trigger it. Possible reasons:
  3. Crash on start

    Inferno11235
    by Inferno11235 · July 2023
    I wanted to add some new slicers to test them and accidentally added 2 of them with the same name, after that app crashed and I can't launch it again, even deleting the folder /home/username/.local/s…
  4. connectivity with raspberry pi gpio pins

    joule5
    by joule5 · July 2023
    Hello I've been trying for days to get my controller board to connect with host via raspberry pi gpio pin header. Do you know of any repetier specific things that need to be done for this? I al…
  5. @execute command not running before job

    TT_Vert
    by TT_Vert · July 2023
    Repetier said:
  6. @execute command not running before job

    TT_Vert
    by TT_Vert · July 2023
    Repetier said:
  7. How to delete ALL settings

    Repetier
    by Repetier · July 2023
    @::00  BB@@::00 
  8. How to delete ALL settings

    Ski52
    by Ski52 · July 2023
    This morning, it allows me to connect without Server running.  Computer has not been reset, stays on 24/7.
  9. How to delete ALL settings

    Repetier
    by Repetier · July 2023
    Only one software is allowed to connect vie serial. That is why you would need repetier server connector in host and not serial to connect via server! Mac host also wont work, use server here as well…
  10. Webcam and Linux (Latest versions of Ubuntu)

    SonjaDCUSA
    by SonjaDCUSA · July 2023
    When following the instructions given on the page Setting up a webcam in Repetier-Server for Linux and you get to Step 4 and need to run "cmake -G "Unix Makefiles", if you look at the …
  11. How to delete ALL settings

    Ski52
    by Ski52 · July 2023
    As soon as I run Server, access to com5 in Host is denied.  Run Host, connect, it starts listing one line per second as above, each line has different numbers but it connects.  Stay connected, start …
  12. Cant remove deactivated printer

    Repetier
    by Repetier · July 2023
    Is there an error message in server.log? 
  13. How to delete ALL settings

    Ski52
    by Ski52 · July 2023
    Well, I uninstalled all of that and still have all the original settings pop up, I'll find them - eventually.  New Problem...  In order to let the Ender connect at all, I have to disable Repetier Ser…
  14. Prusa MK4

    Martin81
    by Martin81 · July 2023
    I have a new abort and here is the server log
  15. Prusa MK4

    Repetier
    by Repetier · July 2023
    I fear it will not help when I see this in your log:
  16. Prusa MK4

    Martin81
    by Martin81 · July 2023
    Thx! I compared the settings with my mk3s+ and yes the PingPong was disabled. I will enable it and try again.
  17. Server 1.4.10 cannot get then to execute via GCODE

    TT_Vert
    by TT_Vert · July 2023
    Little update, I can now run the commands using the user repetierserver however they still do not work in repetier host when using gcode.
  18. Server 1.4.10 cannot get then to execute via GCODE

    TT_Vert
    by TT_Vert · July 2023
    To be clear I meant logged in as user pi they work with or without running sudo.  As a test (I saw this in some of your examples in your online manual) I tried to sudo the command in extcommands.xml …
  19. Server 1.4.10 cannot get then to execute via GCODE

    Repetier
    by Repetier · July 2023
    When you say they work with sudo did you test them as user repetierserver? Default user pi can execute anything with sudo, but repetierserver only what was defined in /etc/sudoers.d files. As test be…
  20. Repetier Server Monitor 1.4.5 - Error adding new server

    jnlacerda
    by jnlacerda · June 2023
    https://prnt.sc/vKJuSsq4_tti
Previous Next

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register