Thanks, but I really don#t know what I am looking for.

I have klipperised all my printers using the Sonic pad. But since it doesn#t support more than 1 camera, I wanted to use the cameras connected to my repetier server as streamcams with the sonic pad.

#### END LOG ####Tue 26 Jul 14:25:01 IDT 2022 ::

https://help.prusa3d.com/en/article/prusa-spezifische-g-codes_112173/#t-codes

https://help.prusa3d.com/en/article/prusa-spezifische-g-codes_112173/#t-codes

$("#tabs").tabs();

Only problems I know are that Tx and T? make problems and should be written like #Tx and #T? instead to get the correct handling of these non gcode commands.

#Tx

#Tx

Ok, I just changed RTS / DTR from "LOW to HIGH" to "HIGH to LOW", and it could connect. Didn#t expect that to change between version 

#this script will get all the websocket output from Repetier Server by writing it into log file

vlc.exe -R "rtsp://10.0.0.96:554/user=admin_password=encryptedpass_channel=1_stream=0.sdp?real_stream" --sout "#transcode{vcodec=mjpg,vb=2500,scale=1.0,fps=10,acodec=none}:standard{acce

#if ! pgrep "xinit" > /dev/null #then # xinit -- -nocursor 2> /dev/null > /dev/null & #fi

https://github.com/watterott/SilentStepStick/blob/master/docs/FAQ.md#the-motor-makes-noise-in-spreadcycle-mode-when-it-is-not-moving

TARGET=30 #Temperatura di innesco della FAN

Semitec # see smoothie site for details #temperature_control.chamber.beta 4300 # or set the beta value temperature_control.chamber.set_m_code 141

#to provide a correct height map from repetier logs.  For some reason, in the current

roject.org/docs/1.7.1/mega-manual/mega-manual.html#the-linux-distro