#2 0x00909e2c in __timedwait ()

#2 0x00909e2c in __timedwait ()

#2 0x008fd8a8 in sigwait ()

#2 server does what you write. You can also add a move to side or raise z (@moverel Z5 F600) or retract filament a bit aside. That is up to you. I assume M600 triggers end of filament handling blockin

#2 server does what you write. You can also add a move to side or raise z (@moverel Z5 F600) or retract filament a bit aside. That is up to you. I assume M600 triggers end of filament handling blockin

The FW i am using (Based on Marlin 2.0.8) sends the M600 for OOF which is why I was replicating it.  Right now if I do #2 listed below (using M600) everything works (Print head moves up and away from

    #2) Think before you type.

"We trust you have received the usual lecture from the local SystemAdministrator. It usually boils down to these three things:    #1) Respect the privacy of others.    #2) Think before you type. 

Section "InputClass"       Identifier "libinput touchscreen catchall"       MatchIsTouchscreen "on"       MatchDevicePath "/dev/input/event*" #Wenn de

#270 degrees

rotation_distance: 23.1098511709 #22.6789511   #Bondtech 5mm Drive Gears

Many Thanks for quick reply. I made some progress with #1 and #2 but run out of time last night. Planning to continue tonight. So far I was able to put my probe activation code into Z_PROBE_START_SCRI

2022-04-28 00:16:38: Connection started: Ender 3 #2

#2  0x00874f70 in sigwait ()

#2  0x00879f8c in __pthread_cond_timedwait_time64 ()

#2  0x00874f70 in sigwait ()

#2 0x00c9c258 in ?? ()

#2  0x0086c916 in abort ()

Feb 18 22:58:49 RepetierServer kernel: [ 8412.396694] usb 1-1-port1: over-current change #2

Feb 18 21:52:05 RepetierServer kernel: [ 4408.189814] usb usb2-port1: over-current change #2