changes commented in code, see pull request #515

Arduino 1.6.7, latest version from master (4.3.2016) - the same result, no manual extrusion.Arduino 1.6.5, repetier 0.92.6 - manual extrusion works.

Here's the firmware I received along with my Melzi 2.0 and LCD2004A kit. (Repetier v.91). When I open up Repetier-host, it says that the printer name is FIRMWARE_NAME:Repetier_V1.4 http://zonestar3d.…

I mean does sendingM104 S255

I cannot make heads or tails of this.  I need to enable AVR Datasheet Pin# 60 for the Laser and Pin #59 for the Spindle.

My zmin endstop is the sensor probe, I have the probe connected to the zmin endstop in the ramps.

Thanks for the fast replay.

Thanks UniversalRemonster ! The probe Z is working now, but i notice one more problem was the XY locaiton for auto level was not what i want?  But i check with the panel face moving the nozzle around…

Well, there's a lot wrong with this configuration.h. First Z-Probe is disabled haha. Below, in red, are the correct settings you should use. 

DECOUPLING_TEST_MAX_HOLD_VARIANCE is a region to be hold when end temperature is reached. This message . raised too slow - comes during inital heatup and means in

#define THERMOCOUPLE_0_PIN  2   // Dua analog pin #59 = A5 -> AD 2

#define THERMOCOUPLE_0_PIN  2   // Dua analog pin #59 = A5 -> AD 2

Hi again,

 #5  0x0000000000423d22 in mono_sigsegv_signal_handler (_dummy=11, info=0x7fa849484bf0, context=0x7fa849484ac0) at mini.c:6769

So if i want 10 µS i should really say 5?

Hi Repetier,

It's \nNo need to delete action "ui_menu_quick_origin" just duplicate with new name and see where it gets added. Below that list is a counter that needs to be increased as well and voila, y…

thanks for your advice. I will try to probe it now.