#define USE_XMIN_PLUG

If not, see . */ #ifndef CONFIGURATION_H #define CONFIGURATION_H /**************** READ FIRST ************************ This configuration file was created with the configuration tool

#define Z_PROBE_X1 0

from below into Configuration.h12:55:34.735: #define DEFAULT_Kp 13.8312:55:34.735: #define DEFAULT_Ki 0.8012:55:34.735: #define DEFAULT_Kd 59.4912:55:34.752: Error:checksum mismatch, Last Line: 20

      #define EXTRUDER_FAN_COOL_TEMP 80

      #define UI_ENCODER_CLICK -1

#define Z_PROBE_TYPE 2               // 0 = no z probe, 1 = default z probe, 2 = Nozzle as probe

   - Commented out #define NO_AMAX_ENDSTOP_TEST

#define ENDSTOP_X_BACK_MOVE 3

#define X_HOME_PRIORITY 2

#define X_HOME_PRIORITY 2

#define Z_PROBE_PIN ORIG_Z_MIN_PIN

#define Z_PROBE_TYPE 1               // 0 means no ABL 

#define NUM_MOTORS 6

#define NUM_AXES 5 // X,Y,Z and E for extruder A,B,C would be 5,6,7

/* Melody on pin 8 of DUE **** Pin 27 on Ultratronics Pro **** http://arduino.cc/en/Tutorial/Tone */ #define BEEPER_PIN 27 // 8 // notes in the melody: int melody[] = { 262,196, 196, 22

#define X_ENABLE_ON 0

#define DISTORTION_CORRECTION 0

#define Z_PROBE_Z_OFFSET 0

#define DRIVE_SYSTEM 1 / z axis + xy H-gantry/core XY (x_motor=x+y...)