Repetier-Forum
  • Categories
  • Discussions
  • About Us
  • Privacy Policy
  • Sign In
Home › Search
  1. Firmware Configuration Issues

    MartinH
    by MartinH · July 2018
    #error Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
  2. MKS MINI 12864 on a RUMBA

    Repetier
    by Repetier · July 2018
    #error Im used
  3. Z Probe with BL Touch Error

    thibis
    by thibis · June 2018
    #error You need to define Z_PROBE_PIN to use z probe!
  4. The heatbed heats automatically if the second extruder is on

    blastactionhero
    by blastactionhero · May 2018
    __AVR_ATmega1280__ #ifndef __AVR_ATmega2560__ #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu. #endif #endif // uncomment one of the following lines
  5. problems with second extruder.

    terzyans
    by terzyans · May 2018
    #error Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
  6. Bed Correction with three motors - little error left

    erik23
    by erik23 · March 2018
    #error You need to define 2 motors for motorized bed correction
  7. Using a Due with no shield

    RAyWB
    by RAyWB · October 2017
    #erro oops! Be sure to have 'due Arduino' selected from the 'tools-> Boards menu'.
  8. Using a Due with no shield

    Anteino
    by Anteino · October 2017
    #erro oops! Be sure to have 'due Arduino' selected from the 'tools-> Boards menu'.
  9. Extruder motor not responding

    SannyGT
    by SannyGT · August 2017
    #error Oops! Make sure you have 'Minitronics ' selected from the 'Tools -> Boards' menu.
  10. Encoder not clicking thru menu properly

    nlancaster
    by nlancaster · June 2017
    #error Gets used
  11. Encoder not clicking thru menu properly

    nlancaster
    by nlancaster · May 2017
    So add #error gets used. Right under those pins?
  12. Encoder not clicking thru menu properly

    Repetier
    by Repetier · May 2017
    #error Gets used
  13. Encoder not clicking thru menu properly

    Repetier
    by Repetier · May 2017
    #error Gets used
  14. M109 Command not working

    NerdHerd704
    by NerdHerd704 · April 2017
    #error Oops!  Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu.
  15. Sdcard configuration place

    Sineg
    by Sineg · March 2017
    #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
  16. Cant get my graphic display to work

    Repetier
    by Repetier · February 2017
    #error My changes
  17. Cant get my graphic display to work

    FrankV
    by FrankV · February 2017
    #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
  18. Arduino due eeprom storage

    Morpheus69
    by Morpheus69 · January 2017
    #error No predefined AZSMZ_12864 mapping for your board available
  19. Z_MAX_PIN

    badman
    by badman · November 2016
    Just configured and downloaded DEV firmware and when compling arduino ide says "#error You defined hardware z max endstop without pin assignment. Set pin number for Z_MAZ_PIN"
  20. Z-height, Z-Min and Z-probe setup questions

    Repetier
    by Repetier · October 2016
    #error i get compiled 
Previous Next

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register