user
About
- Username
- user
- Joined
- Visits
- 114
- Last Active
- Roles
- Member
Comments
-
Repetier said: TEMP_HYSTERESIS is the temperature range you must be insde. The duration to hold is defined e.g. by EXT0_WATCHPERIOD. Eventually it also settable in eeprom settings. Where i can set it in EEPROM? I think that EXT0_WATCHPERI…
-
I set it to 120 but it not wait 120 sec before printing.
-
Repetier said: Yes TEMP_HYSTERESIS is our variable. Only thing it is for all heaters the same. But I do not see that it is also used for bed on a first glance, so maybe it is indeed not included. The parameter is in secs?
-
Repetier said: Since you see the list of webcams you seem at least to have isntalled our webcam scripts as described here: https://www.repetier-server.com/setting-webcam-repetier-server-linux/ I repeat commands from the link. It works O…
-
Repetier said: Are thea all greyed out and not selectable? New server version tests if the entry is running and only allows selecting running streamer webcams. So you should check if mjpg_streamer is running: ps aux | grep mjpg If none is r…
-
Repetier said: Ok for some reason the x flag is not set here. Run sudo chmod a+rx /var/lib/Repetier-Server/scripts/hardware_info and then it should start to appear after a minute. I found the bug in our post install script where there was a …
-
Repetier said: Strange so file is there. What does ls -l /var/lib/Repetier-Server/scripts/ show. Also what does sudo /var/lib/Repetier-Server/scripts/hardware_info now show. I mean when the program is there as you say and if it has x permiss…
-
May be need i upgrade to bullseye?pi@RepetierServer:~ $ screenfetch .',;:cc;,'. .,;::c:,,. pi@RepetierServer ,ooolcloooo: 'oooooccloo: OS: Raspbian 10 buster .looooc;;:ol :oc;;:ooooo' Kernel: armv7l Linux 5.10.103-v7l+ ;o…
-
Repetier said: Ok good to hear that new supply helps. The sudo /var/lib/Repetier-Server/scripts/hardware_info works for me but from message I have to assume that the file is just missing. So deleted file and reinstalled server (it keeps all …
-
I see the files. pi@RepetierServer:~ $ cat /var/lib/Repetier-Server/scripts/hardware_info #!/bin/bash # For raspberry we have some extra tests if [ -x "$(command -v vcgencmd)" ] ; then TEMP=$(vcgencmd measure_temp | cut -d= -f2 | cut -d\' -f1) STFLA…
-
Repetier said: Strange. Cat you try executing manually /var/lib/Repetier-Server/scripts/hardware_infothat is the script delivering the content for bolt icon. Question is if it crashes or does not run or even does not exist to narrow why it do…
-
Repetier said: How long was the gui open? The hardware info is just send once per minute and only appears after first message. But I see it in your ssh shell and it would not differ. So you have at least had undervoltage and it is a potentia…
-
https://imgur.com/a/gL6eVht
-
Repetier said: You see it in bolt icon in our gui. There you see also the undervoltage warning. Icon gets warning/error color depending on current/past condition. On pi 4 it can also make a difference if you use usb 2 or usb 3 ports. Since p…
-
Hi! I think that it undervoltage. Today i has regular disconnected from printer. I connected used ssh to raspberry pi and in console i sow: Your pi suffered from undervoltage! This can cause instabilities and a lot of errors. See https://www.repetie…
-
Repetier said: What do you mean? It can also happen when you disable e.g. all heaters at once. At least that is what we have already seen with other users. If the printer is turned on all day continuously and without work, there will be t…
-
I has the error if the printer do nothing. It looks like timer.
-
Hi! Today i has an other error and stoped printing. I has disconnected +5 V from the printer. I will tested an other USB cable.
-
Repetier said: You need to provide information in which second you did what and what happened to make use of a log. But I see Feb 19 10:51:48 RepetierServer kernel: [51192.318961] usb usb2-port1: over-current change #8 Feb 19 10:51:48 Repeti…
-
I changed an USB cable today. It not helped to me. Feb 19 10:50:25 RepetierServer dbus-daemon[451]: [system] Activating via systemd: service name='org.freedesktop.timedate1' unit='dbus-org.freedesktop.timedate1.service' requested by ':1.1633' (uid=0…
-
Repeat: Feb 18 22:58:49 RepetierServer kernel: [ 8412.264661] usb usb2-port1: over-current change #3 Feb 18 22:58:49 RepetierServer kernel: [ 8412.279307] ch341-uart ttyUSB0: usb_serial_generic_read_bulk_callback - urb stopped: -32 Feb 18 22:58:49 R…
-
In /var/log/syslog: Feb 18 21:51:34 RepetierServer systemd[1]: Starting Time & Date Service... Feb 18 21:51:34 RepetierServer dbus-daemon[451]: [system] Successfully activated service 'org.freedesktop.timedate1' Feb 18 21:51:34 RepetierServer s…
-
Repetier said: Printing from a Raspberry Pi or full pc? If pi - do you see undervoltage in the bolt menu? If it happens note the exact time and open /var/log/syslog the same timestamp to see what linux did and why? Apart from undervoltage cau…
-
Repetier said: Printing from a Raspberry Pi or full pc? If pi - do you see undervoltage in the bolt menu? If it happens note the exact time and open /var/log/syslog the same timestamp to see what linux did and why? Apart from undervoltage cau…
-
Repetier said: With the update the repetier.xml does not need to be edited. You can copy files into server directories. Server needs to know that files are added as it runs extra computations on them. Repetier-Server Monitor is our solution …
-
Repetier said: Ok so glad it now is updated also manually. There is no log for this problem I think. I have now a 2gb sample so hope I can reproduce with it later. I think it is most likely a timeout from the file being not uploaded in an exp…
-
Repetier said: Is it only with the big file selected that it fails? In that case, please use the manual method for it. I can not say why it fails. Will try to create such a big file for tests and see if I can reproduce for a future version. T…
-
Repetier_Support said: How did you enter the ip of the server into the RS-monitor? Did you entered it with port 3344? https://imgur.com/a/GSUtnOV
-
Repetier said: How much free disk space do you have on the target? You need minimum 6GB free space to store all the zip files. https://imgur.com/a/OJvT9cO I think that it ok.
-
Repetier_Support said: okay. Could you please provide me some details about the backup size? https://imgur.com/a/AFdubXJ ~ 6 Gb