umitakin
Türkçe Octal kod Paketi'ş' = '\376''Ş' = '\336''ğ' = '\360''Ğ' = '\320''ç' = '\347''Ç' = '\307''ı' = '\375''İ' = '\335''ü' = '\374''Ü' = '\334''ö' = '\366''Ö' = '\326'
About
- Username
- umitakin
- Joined
- Visits
- 13
- Last Active
- Roles
- Member
Comments
-
problem smart adapter . I removed the plastic housing from the smart adapter and changed the orientation. uniconfig.h //#define U8GLIB_ST7565_NHD_C2832_HW_SPI // unmarked there is an image on my screen but no menu.
-
Could you help me to run MKS_MINI_12864? I use repetier frimware 1.00 What kind of screen should I choose in repetier frimware? my GLCD does not work as in the video above
-
you misunderstood what I wrote.they say marlin is working this code.I could not run.I have added the code above.how Repetier frimware to run GLCD.
-
repetier is working steadily.marlin gives error.Would you solve this problem
-
Marlin ConfigurationThe following assumes:a) A mega2560 CPU b) RAMPS 1.4 shield c) The MKS MINI 12864 LCD controller is plugged into the Smart Adapter (the card used to interface to the RepRapDiscount Full Graphic Smart Controller). 1.In Con…
-
http://reprap.org/wiki/MKS_MINI_12864
-
repetier not working,the backlight of the screen is flashing Thanks,good work
-
sorunu buldum. x ve y ekseni z ile senkronize oldugu için end stoplarda x,y ve z max olacak ancak home x min y min z max olarak ayarlanacak end stopların delta yazıcıda fonksiyonu farklı. aynı sorunla karşılaşan arkadaşlara ayrıca exturuder motorunu…
-
Türkçe: endstop ayarlarında yazılım denetimini tamamen kapatmışsın ve x ile y max endstop değerini vermişsin ama home komutunu verdiğimizde x=0 y=0 z=332 oluyor bende yani x ve y min z max nasıl dogru değer alıyorsun? ENGLISH : Endstop ayar…
-
Yukarıda verdiğim kodları incelemeni tavsiye ederim. Otomatik kapatma motoru sağa sola çarpabilir.
-
// ################ Endstop configuration ##################### #define ENDSTOP_PULLUP_X_MIN true//false #define ENDSTOP_X_MIN_INVERTING true //boşta endstop kapalı değer döndürüyor #define MIN_HARDWARE_ENDSTOP_X true//false // kapatıyor //--…
-
hi. Bende aynı sorunu yaşıyorum. Z end stop z motorunu durduruyor , X ve Y motorları durmuyor. Kossel için end stop ayarı X min - Y Min - Z Max değil mi?
-
Largest x axis: 72The smallest x-axis -64Largest Y axis: 77The smallest Y axis -77my printer :https://drive.google.com/file/d/0B6Stm3Sp3RWdd18taXpSSG5OSFE/view?usp=sharing
-
My 3d Printer:https://drive.google.com/file/d/0B6Stm3Sp3RWdd18taXpSSG5OSFE/view?usp=sharing
-
https://drive.google.com/file/d/0B6Stm3Sp3RWdTXNoZFBCMFBmaEE/view?usp=sharing Https://drive.google.com/file/d/0B6Stm3Sp3RWdOWRlSjJYS0V5Mkk/view?usp=sharing Https://drive.google.com/file/d/0B6Stm3Sp3RWddThwN1NsWWtkQmM/view?usp=sharing Benim örnek ç…
-
Our questions seem very absurd to you. But I try to understand. Thank you for your interest.
-
Flow multiplier for filament ? Is it from memory or software?Extruder step :357 Filament flow rate from extruder is normal.Filament release rate is% 106
-
The tray is flat but the Nozzle head rises to the air as it moves to the sides of the tray.
-
EEPROM usage is activeHow do I tell the nozzle to move over the bed as the x, y, and z axes move away from the center.
-
Thank you. I found the problem on the printer.I checked the settings of the motor driver on the Printer Card. I increased the current value of the motor driver. The carbon tube leading to the extruder den nozzle is narrowed and obstructs the passage…
-
Hi, As I understand from the above explanations and using reprap 1.4 with ardunio, the card restarts itself because the endstops are faulty or shorted and the digital pins get into the output instead. Is not checked my cards right endstop changes? C…
-
Durumu düzeltebileceğim EEPROM ayarlarında bir ayar var mı?I do not have a hardware problem. Everything is normal at idle. When I go to print, the extruder motor locks up and goes to waste. The engine is not stepping step by step.
-
Thanks, Where can I check the temperature safety setting?
-
EXT0_Y_OFFSET değerinin ekstrüder etkisi nedir? Where can I find out the extruder values in the EEPROM registration files?
-
Yazıcımın Modeli :Delta Kossel Mini Kullandığım Yazılım :Repetier Firmware 0.92.9Z probe ayarları : NormalX,Y ve Z eksenleri : Koordineli çalışıyor.Nozzul Ayarları : Extruder Motor step ayarı normal , manuel filament ileri itme ve çekme normal, Isı…