tpila1
About
- Username
- tpila1
- Joined
- Visits
- 2
- Last Active
- Roles
- Member
Comments
-
OK now i works Hmm dunno if it's related to Repetier: My board (RADDS) has two outputs on Z stepper for 2 motors and i use them. Is there a way to somehow split them that if both endstops don't enable at same time one motor will raise its axis to e…
-
I'm using most recent version, this error is from 5 minutes before posting. I just tried another run with configurator and it's the same.
-
You're right, eeprom values were different than those in firmware. I've changed them and now everything works great:) Thank you for help
-
Hm i don't think i uderstand. In firmware configurator this option is called Cooler PWM speed and with samller letters there is EXT0_EXTRUDER_COOLER_SPEED. By default it's set to 255. Same goes for EXT1_EXTRUDER_COOLER_SPEED. When i…
-
I've also tried this setting: EXT0_EXTRUDER_COOLER_SPEED but it doesn't work for me. Whatever i type into there there is always stable 24V output on extruder cooler pins. I'm using chimera type extuder so i have 2 extruders that use one 1 cooler, i'…
-
Ok there is little progress Print cooling fan now works correctly with function you've added to configuration. But it looks like extruder fan is controlled differently and its PWM is still 255
-
Great! Thanks, i'll try this as soon as i can and post my feedback.
-
Thanks, i will try this when i get home from work, could you also add this to FAN2? I have board fan at Heater3 output and as i said it work. But both other fans are at FAN and FAN2 and i'd like to use both at 12V.