steveb1475
About
- Username
- steveb1475
- Joined
- Visits
- 26
- Last Active
- Roles
- Member
Comments
-
It's borked again but I think I know what is happening. I scaled my MPCNC up a bit and while I was manually moving the machine around by hand with it unplugged I saw that the power light on the pi was flickering. The motors were regen'ing and I thin…
-
I don't always shut it down before removing power, I know that's bad. It would run maybe 30 to 55 seconds before locking up. I did an apt upgrade after stopping RS, rebooted and that seems to have fixed it. Strange, something must have been cor…
-
I was using Chrome the whole time. It looks like it is working now, thanks for fixing it. Thanks for your work on this great software! Steve
-
When I upload a configuration.h file, it looks like it works fine, all the defs look like they have values. There are a lot of differences when I compare the two files. For example, my #define USER_THERMISTORTABLE0 is gone... The files are in this…
-
Looks like a problem, everything in the configuration string is gone. I've tried this on 2 different PC's, same result. /* Below you will find the configuration string, that created this Configuration.h ========== Start configuration string =======…
-
Strange how many differences there are between the two files, let me know if you can't see the image and I'll put it somewhere else.
-
Yeah, there is some kind of problem with the config.h file if I download the firmware with the "Download complete firmware incl. these settings" button - the values in defs are all missing. If I use the "Download Configuration.h" button, the values…
-
I created the config from the web based configuration. I don't have java disabled or anything. I tried this 2x both with the same results. Same settings, .92 throws compile errors, .91 compiles fine. Thanks