› ›

sklemp

About

Username
sklemp
Joined
Visits
11
Last Active
Roles
Member

Comments

  • What type of material are you printing and at what temperature? I had this problem with an aftermarket J-Head nozzle then bought an "official" J-Head and no longer see the problem. I can print PLA at 180 C. Hope this helps.
    in Extruder speed Comment by sklemp November 2014
  • If I set the Z-Probe height to 15.000, then the first measurement shows 15.  Why do the other measurements show 28.11 and 28.18? Is there something in the EEPROM that I have set incorrectly? Thanks,Steve
    in Delta Printer Z-Probe not looking right Comment by sklemp November 2014
  • I understand that the Maz. z-probe - bed dist. = 0.000 should be different.  I will adjust that to a positive number. Z-probe height = 0.000, though, I thought needed to be 0.000.  I am using FSRs and the nozzle is actually hitting the bed to trigge…
    in Delta Printer Z-Probe not looking right Comment by sklemp November 2014