› ›

sandersen

About

Username
sandersen
Joined
Visits
56
Last Active
Roles
Member

Comments

  • The printer is now up and running with Repetier Server, running on Debian Wheezy. It works nicely - quite responsive The firmware setup is the same, no conflicts. I haven't solved the SD problem yet but it isn't highly prioritised now because using …
    in Printer communication problems Comment by sandersen June 2015
  • As far as I am aware the A9(quad core microprocessor) and M3(DUE microcontroller) only share two serial connections which corresponds to the M3's programming port and native port. I can reroute the connection by unplugging a jumper on the UDOO. If I…
    in Printer communication problems Comment by sandersen May 2015
  • Okay, the motor problem didn't solve itself.. It works when I shutdown the OS (debian) on the UDOO manually. If I prevent it from booting by ejecting the sd the problem occurs. To sum it up: - When OS is running I can connect but I can't send instru…
    in Printer communication problems Comment by sandersen May 2015
  • I am using 0.92.3 I can't grasp this bug but somehow after I was working on the UDOO. it managed to fix it self. I didn't make any significant changes in the firmware but I changed the OS from lubuntu to debian. I decided to change to debian since i…
    in Printer communication problems Comment by sandersen May 2015
  • Understandable. It is har to find people who have experience with the UDOO for this application.    I have just triple checked. The printer behaves as I said. When I connect with repeater host something changes and the mirrored x-motor just becomes …
    in Printer communication problems Comment by sandersen May 2015
  • Sorry I was a bit unclear. I managed to connect by usb cable. The UDOO uses a seperate sd for OS, the one I ejected. I haven't been able to solve the SD problem. Do you have any other suggestions about what could be wrong.? Right now I am running 0.…
    in Printer communication problems Comment by sandersen May 2015
  • I solved the connection problem by ejecting the UDOO's sd, making it unable to boot linux. So the connection problem was caused by interference from the board computer.    
    in Printer communication problems Comment by sandersen May 2015
  • Thanks, I got my display working again just by changing firmware. I have been changing between 0.91 and 0.92 without any noticeable differences. I have tried several different sd cards all between 1-2 gb and I have tried both FAT and FAT32 without a…
    in Printer communication problems Comment by sandersen May 2015
  • Thank you very much for your reply 1: I have tried and checked everything you suggested without any results. And I also have another problem now, the display has stopped working. The background lighting and the controls still works but it doesn't di…
    in Printer communication problems Comment by sandersen May 2015