rhinotek
About
- Username
- rhinotek
- Joined
- Visits
- 22
- Last Active
- Roles
- Member
Comments
-
Ok I have set the speed 15mm/s and could you please guide me the vibration limit setting , may I set 10hz or 0hz.
-
and this is the G-code file generated by slic3r:https://drive.google.com/file/d/0B6r6B2FEWb4sckE2VFl6NHR5RVE/view?usp=sharing
-
And these are my Slic3r setting photo link below:https://drive.google.com/file/d/0B6r6B2FEWb4seW40MVMwVnJndzg/view?usp=sharinghttps://drive.google.com/file/d/0B6r6B2FEWb4sdW01OGpCNU1TaVk/view?usp=sharing https://drive.google.com/file/d/0B6r6B2FEWb4s…
-
kindly see my repetier settings and suggest, below are google drive links, Thanks.https://drive.google.com/file/d/0B6r6B2FEWb4sOWVFcjhrMG5iVms/view?usp=sharing https://drive.google.com/file/d/0B6r6B2FEWb4sT1NpeDI3cFgyaVE/view?usp=sharing https://dri…
-
Yes it looks like layer shifting error, also let me know how to upload screen short of my problem.
-
Hi, Nothing happened with slow speed slic3r settings, same issue, i noticed the generated g code program that X, Y location changed in second layer (i.e) far away from first layer origin. also when i check the visualization layer movement in repetie…
-
Thanks for reply, my motor calibration is all ok because i have checked a print by uploading a sample g code from internet i was a simple object, printed perfectly. but when i generate a g code with repetier + slic3r . it gives me crazy coding