remcohn
About
- Username
- remcohn
- Joined
- Visits
- 2
- Last Active
- Roles
- Member
Comments
-
Is there any way to control printers over WiFi from a single server instance? like using a RaspberryPi Zero with some trickery to get the serial port forwarded over WiFi to the main server? or would the latency be too high? I would love to give each…
-
sounds to me like you configured the wrong ADC channel for the buttons and its pressing them at random.
-
both X and Y are 80 steps per mm. and it does small moves just fine. can manually step 0.1mm and it comes back perfectly. same for a move of 50mm or at 5mm/sec, perfectly smooth. This is what gave me the idea its skipping gcode lines. I am currentl…
-
like this
-
im not talking about the infill area but about the BIG visible stepping. thats not in the gcode.
-
hm, looks like picpaste doensnt like deep linking. this should work pic
-
the result is 100% repeatable when printing from SD card or via repetier host/server
-
that is the result. print is about 20mm wide, so quite small. but it has very discrete steps. the gcode file renders just fine in repetier-server etc, and prints fine on my friends printer, with the same nozzle diameter and material. its supposed t…