rcp
About
- Username
- rcp
- Joined
- Visits
- 1
- Last Active
- Roles
- Member
Comments
-
Thanks for your effort, I changed the cutom Gcode to M221 S95 and it now works as expected. Great support !
-
Thanks for that info, on this printer I normally use repetier-host or sd print, this is the first time I have ever used an app-pak version.
-
Okay, I uploaded a short video so you can see the difference between printing via Octoprint and Repetier. (BTW Slic3r-1.3.1-dev with Adaptive set @ 75%) Video is https://youtu.be/0b9sekUJCCw You can get the stl and gcode from http://www.tuxsoft.co.z…
-
Okay I pretty much found that any gcode produced by slic3r 1.31-dev fails when sent through Repetier so I think I could just post my print profile. Basically what happens is the extruder does the rim and perimeters okay then as soon as the first lay…
-
I believe all the G-Code is correct, printing direct from Slic3r also works perfectly as does sending the G-Code to Octoprint. The problem seems to be only occur once the infill starts and might be related to acceleration or Repetier truncating so…