› ›

psosnows

About

Username
psosnows
Joined
Visits
1
Last Active
Roles
Member

Comments

  • Yes! That did the trick! Thank you! I am off to calibrate it and start first print since ever! Last curiosity regarding the version upgrades - I know that there were multiple improvements since 0.91 through 1.0 and 2.3, and I would love incorporate…
    in Resurrecting printer with Gen7 board Comment by psosnows November 2023
  • I made some progress - really appreciate your support. While I (wrongly) thought the total size might be the problem, I tested the older versions of the Firmware. Switching to Repetier 0.91 rev8 using Arduino 1.0.3 and Gen7-Arduino-IDE-Support-2.1 …
    in Resurrecting printer with Gen7 board Comment by psosnows November 2023
  • Thank you for your answer! I read somewhere that Gen7 does not support EEPROM, though I will look into it. Unless my cables are bad, the transmission should be OK, I tested with 4 different baud rates. Regarding memory - as far as IDE tells me, the …
    in Resurrecting printer with Gen7 board Comment by psosnows November 2023