pantherius

Comments

• Thanks a lot for the feedback. Yes, I have another and it works like a charm. So maybe I'll purchase another one. I'll also check the "housing had contact to usb ground" thing, thank you!

  in Printers stopped for few sec, console message included Comment by pantherius November 2022
• Yes, thank you, I'm working on it. Just thought it would be useful to share my experiences with anyone who has the same issue in the future.

  in Printers stopped for few sec, console message included Comment by pantherius November 2022
• Changed the power and data cables, moved the Raspberry Pi 4 to another location, also added dwc_otg.speed=1 (based on Google search) that helps a bit, the issue happens less frequently, but doesn't solved the issue. Still looking for the solution.

  in Printers stopped for few sec, console message included Comment by pantherius November 2022
• Thank you so much for the help. I'll try to investigate it further. At least it is now seems to working without failed prints. Have a great day! Thanks again for your professional support!

  in Printers stopped for few sec, console message included Comment by pantherius November 2022
• Repetier said: Yes, thats good power so far. So guess you will now see a message like Sep 21 14:49:34 Repetier-Server kernel: [27513.884540] usb usb1-port1: disabled by hub (EMI?), re-enabling... Telling that USB hub disconnected device. …

  in Printers stopped for few sec, console message included Comment by pantherius November 2022
• Thank you! Thunder icon shows everything works fine: https://ibb.co/37vFL7S Just updating to 1.4.3 and will come back with the log later. Thanks a lot!

  in Printers stopped for few sec, console message included Comment by pantherius November 2022
• Just sent few commands via the console to the printer and I got this (might help): Send:16:38:45.560: N27 M900Mesg:16:38:49.564: Warning: Communication timeout - resetting communication buffer.Mesg:16:38:49.564: Connection status: Buffered:39, Manu…

  in Printers stopped for few sec, console message included Comment by pantherius November 2022
• Sorry for the delay, I have to test the things to see how does it works. Reduced the timeout to 3sec as you suggested and it seems to be the period while the machines stopping is better, sometimes I even don't notice it was a break. Also the prints …

  in Printers stopped for few sec, console message included Comment by pantherius November 2022
• Thank you, will try that too.

  in Printers stopped for few sec, console message included Comment by pantherius October 2022
• Just realized I'm using 1.1.2, let me try updating to 1.4.2 Still weird my other server doesn't has this issue, so I'm not sure it will help. Will be back soon.

  in Printers stopped for few sec, console message included Comment by pantherius October 2022
• Thank you for your answer! All printers stopped, then continue around 20-30sec later normally. Certainly, it is still not good enough as they leave faults on the print where stopped. The printers' icons switch to orange bars from the green connect…

  in Printers stopped for few sec, console message included Comment by pantherius October 2022
• Forgot to mention, all machines has the same Marlin 2.1.1

  in Printers stopped for few sec, console message included Comment by pantherius October 2022