lukasz_b_g
About
- Username
- lukasz_b_g
- Joined
- Visits
- 2
- Last Active
- Roles
- Member
Comments
-
As I posted it I realized the mistake, it should be F, not E. Thanks for making me realize
-
This is what I have as my end script, it was working fine, until it stopped working at all. G91G1 X0 Y200 E-1 E7500G1 Z40 E-1 F300G90G92 E-6
-
Sorry for the late reply, but I couldn't earlier. Yes, a screenshot: and a photo, taken moments later: O you can see, that they are not the same temperature. The hotends are identical.
-
Ok, I sent M015, and this was the response: 11:17:34.503: T:190.06 /190.00 B:30.36 /0.00 T0:190.06 /190.00 T1:28.27 /0.00 @:66 B@:0 @0:66 @1:011:17:35.504: T:190.06 /190.00 B:30.42 /0.00 T0:190.06 /190.00 T1:28.32 /0.00 @:67 B@:0 @0:67 @1:011:17:36…
-
I've found that now, but when I activate the second extruder, it shows the temperature for the first one