killerb
About
- Username
- killerb
- Joined
- Visits
- 1
- Last Active
- Roles
- Member
Comments
-
Awesome. Thank you.
-
Any update on a revised version of repetier server? I am ready to help test, if need be.
-
After more digging, as with the other user having the same issue, it does seem to be when a negative time remaining is when the screen goes blank for the first 3 lines of text. It's reproducible. Prusa slicer gcode doesn't have a negative time. T…
-
The display vanishes right after the purge line is printed and comes back right after the print finishes. I can very faintly see it coming back for a split second then goes away again. I am on the latest Prusa firmware 3.7.2 After I changed it to …
-
I read through that thread before posting my question. I could not discern an actual solution to the problem.
-
My machine does not have an einsy board. It's an MK2.5. Uses the rambo mini 1.3a. I am using a raspberry pi 3b+. For more testing I used my older octoprint server which is also on a raspberry pi 3b and when printing from octoprint the text stays …
-
I was going to install the image for pi but after a bunch of reading I saw that the armhf variant runs faster than the pi version. I was able to successfully add reboot and shutdown to the menu via the manual. Thank you!