kaestnerw
About
- Username
- kaestnerw
- Joined
- Visits
- 3
- Last Active
- Roles
- Member
Comments
-
Thank you for your help, I willtry with 0,2 height.
-
Hello, I made Screen-copys of all parameterfiles - link: https://www.dropbox.com/s/bbar34uggouv4l9/slic3r_Parameter.pdf?dl=0can you please look at them.Thank you
-
Thank you for your work, of course I will send them.I can make schreen-printouts of all 3 parameterfiles or is there another way to send them (f.e. copy data from the disk and send them) ?
-
I also put the stl-file into dropbox: https://www.dropbox.com/s/zm25m3lj40rpkjv/EheringeB.stl?dl=0
-
Sorry I forgot the slicer-version: slic3r 1.3.1 dev.I used dropbox and postet the 3 pictures before slic3r: https://www.dropbox.com/s/lqvv3rauslu6z62/vor_slic3r.jpg?dl=0after slic3r with rephost 2.1.6: https://www.dropbox.com/s/syu7pjxwa97c3yz/nach…
-
Thank you, I found it.
-
Hello, I did some testing and now it works as it should. today I printed a object with 195 x 195 mm.Thank you.
-
Hello, I did some add. testing - the problem (second) of lifting the printhead in the right area is solved, the cable to the fan in the printhead was too short. sorry - my fault. concerning the printable size I tried the following parameters: slic3r…
-
Hello, in the meantime I have installed the newest Version of Repetier-Host (2.1.6) and with this the slic3r 1.3.1 on a laptop. In the printer-settings - Bed shape the size of 200 x 200 mm. When the printhead ist at home-Position, it needs to got to…
-
thanks for your fast advice - I corrected the output settings in slic3r for the printer.its better now but I still have to do some testing. You write I am using an old host version - which version should I use for this printer and what slicer ? The …