jimbo
About
- Username
- jimbo
- Joined
- Visits
- 23
- Last Active
- Roles
- Member
Comments
-
YOU ARE ABSOULTLY RIGHT! I knew I was making some dumb mistake; I just could not see it. It works perfectly now, Many thanks,
-
I turned off the firewall and it did not help. I am using the Repetier server on the same Windows 10 machine as the YawCam. Everything is on one machine - there is no network involved in the problem. Is there some way I can upload a screen image of …
-
I am running the Yawcam and here are my settings. I am doing something wrong, but I cannot find what it is! http://192.168.1.104/8081/video.mjpg http://192.168.1.104/8888/out.jpg
-
Thanks for the reply. The Prusa Rambo using the power not a problem since I get the error when booting the Pi even if the Prusa printer is turned off. Two things make me concerned: after many months of no voltage errors, I now get it all the time…
-
more information that might help. I have changed the USB cable, and the micro SD card. This low voltage is combined with 'CPU throttled' and lasts about 20 minutes and then the reading is 'under voltage in past'
-
I am using version 1.03 and everything in the Repetier-server folder is very old. Maybe it needs to be updated? I do not know how to update the folder.
-
Thanks for the advice. I have always just turned off the power at the end of the day. I will change my habits! this may solve my problem.
-
I wanted to send an attachment of the files I copied but I do not see an attachment buttom
-
OK, so logged in - I should have known this the server is running when I do 192.168.1.66:3344 I get 'Requestedfile not found' I am sending some files to show it is running at this time Now the other 'stuff' - I am not a computer expert and I know …
-
I have upgraded and running 0.94.1 everything seems fine and I printed an object that took about 1 hour without a problem. About 1 hour after the print, I lost the connection with the server. The server still seems to be running and I can ping and g…
-
the auto-updater worked! thanks
-
Repetier said: Haven't updated the image yet. Comes next. I'm always using wired connection via dhcp (easiest solution) and no problems. If you don't use dhcp you need to set all parameter including netmask in ip and gateway/nameserver. Yes…
-
I have tried to upgrade to the 0.94.1 version but the download just gives me the 0.94 version - can not get the updated version!
-
sorry, this post and my most recent post have gotten mixed up - my new problem is the loss of connection with the upgrade to version 0.94 - please refer to that post
-
Repetier said: Make sure firmware is set to Marlin, baudrate to what is set in firmware. Also select "Port is visible even when unconnected". That is a behaviour of Prusa printers that it looks like firmware is there but only the usb port whi…
-
I notice there is a version 0.94.1 - I tried to download and install but 1. the downloaded file is just labeled as 0.94 and when I install it and look for an update it says I do not have the latest version. Also, now I am having trouble with the pro…
-
very good, was just looking in the wrong place, Thanks.
-
thanks for the reply I have the pro version and have Repetier Server Monitor ver 1.1 and I can not find the 'backup function' I assume it would be under 'action' but it is not - where else could it be?
-
now it is working great!
-
thanks for the reply yes I did put it in the "event dependent" > 'run on pause" I have changed x=250 y=0 - I think this is my right front corner on my MK3S I changed the F to 12000
-
I tried your G code yesterday, the printer did pause in place but it did not move to the right front corner. On 'continue' the print resumed as expected. Can you still help?
-
THANKS it took some looking but I found it. rather easy now that I know-how!
-
THANKS FOR YOUR HELP could not have done it without you!
-
thanks for the reply. This looks exactly like what I need. But I know very little G code. I almost always need this early in the print. So I would add this to the 'Pause' G1 XO Y180 F1200 G91 G1 Z30 F240 G90 do I have this written correctly?
-
Thanks again!
-
thanks for the help if I put the ; infront of the command, will it still work?