jamac

About

Problem solved. Turned out I was supplied with a heater for 24v setup. Thanks for the answers!

in Extruder won't heat up to more than 185 degrees with PID control Comment by jamac August 2016
Unfortunately that seems to be the case - the output stays at 100% - a faulty heating element. Which is weird since I've been using a printer with the same extruder (same batch even) which could easily go up to 250-260. Out of curiosity, how is the…

in Extruder won't heat up to more than 185 degrees with PID control Comment by jamac August 2016
PID_INTEGRAL_DRIVE_MAX was already set at 255.Lower values don't seem to make a difference. In my first post you have all of the current settings. EEPROM has been disabled. It beahves as there was some firmware imposed limit at 180 degrees. Been t…

in Extruder won't heat up to more than 185 degrees with PID control Comment by jamac August 2016
you mean PID_MAX ? it's set for 255

in Extruder won't heat up to more than 185 degrees with PID control Comment by jamac August 2016