ijourneaux
About
- Username
- ijourneaux
- Joined
- Visits
- 57
- Last Active
- Roles
- Member
Comments
-
I guess I am SOL. This used to work under Win7 but with Win10 the version of OpenGL is nolonger correctly detected. Thanks for trying to help.Ian
-
I reinstalled Repetier-Host and selected the other library (Just to make sure this is the item in the dialog with the checkboxes that refers to useng that version if the other didn't work) Unfortunately this did not change the behavior. The detecte…
-
Sorry for picking this back up so late. Model size doesn't seem to matter. I have quality set to medium Here are the entries in the Log file. 15:50:09.118 : OpenGL version:1.1.015:50:09.118 : OpenGL extensions:GL_WIN_swap_hint GL_EXT_bgra GL_EXT_pal…
-
It does work in STL view. I can rotate/zoom the objects there without a problem. I get the crash is when I switch to view the g-code. Sometimes I can switch to gcode view and not crash but most of the time the crash occurs immediately. It looks li…
-
I tried the version you posted above. I was hoping it might resolve my issue as well. Unfortunately I can't get it to work at all. After I installed it, When I go to run it, I get 3 entries in task manager and I can't kill them manually. I end up ha…
-
Rossco Are you using PLA or ABS? For PLA, I use blue painter tape. For ABS, I use Aquanet hair spray. The adhesion is great once you get the first layer down correct.
-
There are 3 OpenTK files in the installation folder. Version 1.0.6 and 1.5.6 appear to have the same versions of the files (based on the date of the .dlls).To be safe I copied all of the dlls from version 1.0.6 to 1.5.6. The behavior did not change.…
-
Any update on getting Repetier Host (OpenTK) to correctly detect the version of OpenGL that is available on the computer. I have confirmed that on my lenovo T520 laptop that OpenGL 3.1 is available and it does work correctly with Repetier Host 1.0.6…
-
I have the Intel HD3000 display adaptor in my Lenovo T520 laptop. It is definitely capable of OpenGL 3.* and it does work with Repetier Host 1.0.6. Unfortunately with Repetier Host 1.5.6 only the generic OpenGL 1.* (Generic GDI) is used. It would se…
-
It is probably not the most supported card but it looks like OpenTK is just grabbing the wrong OpenGL. Choosing a default over the one that works for the graphics card.
-
As long as I don't touch the preview window, I can successfully print with version 1.5.6
-
Antialiasing is not checked. I did confirm that I was using the Legacy 3D library and that the version of OpenGL that is detected 13:06:16.416 : OpenGL version:1.1.013:06:16.416 : OpenGL extensions:GL_WIN_swap_hint GL_EXT_bgra GL_EXT_paletted_textur…
-
That is the same driver (15.28.24.64.4229) I am using. It is good to know that we are both seeing exactly the same behavior. I tried installing Host with the Legacy 3D library selected but It did not change the version of OpenGL detected by Host an…
-
So, if I understand correctly, this seems to be an OpenTK issue. I did have the same problem (crashes) with version 1.5.5 but I did not notice what the OpenGL log message were at the timeLet me know if there is anything I can do to help. In the mea…
-
Another minor thing. When switching back to 1.0.6, I get the following error messages in the log. It doesn't seem to impact anything. Just wanted to point it out. 14:26:39.912 : Plugin RepetierServerConnector.RepetierServerConnector:Could not load t…
-
With 1.0.6 here is the OpenGL lines in the log file 08:13:13.893 : OpenGL version:3.1.0 - Build 9.17.10.422908:13:13.893 : OpenGL extensions:GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_blend_color GL_EXT_abgr GL_EXT_texture3D GL_EXT_clip_volum…
-
Just posting a status update. I tried version 1.5.6 with and without the legacy 3D option. After the models get sliced, RepetierHost crashes when start moving around in the program.
-
Not ideal but I returned to version 1.0.6 and the crash does not occur with slic3r 1.29
-
I know they are completely different programs doing things completely differently but doing them successfully. I really want to stay with Repetier Host. Just want to help out to solve the problem. Here is some more information. Marvin is a small mod…
-
I tried 1.5.5 last night. Unfortunately it didn't fix my problem. When I slice (Sclic3r 1.2.9) the little Marvin figure, it slices then switches to the Preview pane and then hangs hard with lots of continuous disk activity. Not thinking ahead, I ha…
-
Not sure if this helps but here is the error from the event log. Faulting application name: RepetierHost.exe, version: 1.0.0.0, time stamp: 0x55b091c5Faulting module name: KERNELBASE.dll, version: 10.0.10240.16384, time stamp: 0x559f38c3Exception co…
-
Ok. Eventually the computer came back on-line (about 1hr later) but Repetier was hung (unresponsive). I was unable to kill Repetier with task manager.
-
I have just been using the small Marvin model from 3DHub. It causes Windows to crash hard right after Repetier switches to the Preview window. This doesn't seem to impact MatterControl or Cura. I will let it run for a while now (I am logged in remot…
-
I was reading another thread indicating using Cura to slice worked. That is the case for me. I would still like to use Slic3r though
-
I upgraded from Win7 to WIn10 and am experiensing the similar issue to what is reported here. THe program crashes hard and takes down the computer right as Repetier changes from the slicer to the preview. Even though the computer is totally unrespon…
-
I took a closer look. It isn't the temperature, it is the bed output. ScreenCapture
-
Thanks for the quick reply. I tried to post this image (not that it was critical). For somereason, it would not display. I will followup with the Printrbot guys.
-
It is repeatable. Here is a picture. When I clicked print you can see the temperature setpoints change then the bed output drops quickly. I don't believe the bed outout is actually dropping as the bed temperature continues to increase.