› ›

gathur

About

Username
gathur
Joined
Visits
3
Last Active
Roles
Member

Comments

  • Well the thing is that I am pretty sure that the limits are set to the correct size both in Repetier and in Cura, they even light green to show the setting match the firmware values.  And the prints are pretty small to be offlimits. You could even t…
    in Defined Printer Limits Comment by gathur November 2018
  • The server is on a windows machine.  the process was terminated, not unresponsive.  I just had to start it again.  Meanwhile, I did a reinstall of everything and now it seems to work back again.   It would have been intersting to know what made it…
    in Repetier server crashes at the end of the prints Comment by gathur November 2018
  • yes it is the last version 0.90.7 pro version.  I tried to erase and resinstall the printer but to no avail.  I checked the Repetier logs and they mark the event as an "external reset". Perhaps there is something conflicting with the stock firmware…
    in Repetier server crashes at the end of the prints Comment by gathur November 2018
  • I am upping this thread again because Repetier now does again exactly the same for every printer I add:  Complaining about the prints being off limits Perhaps Cura hates me or I have a repetier curse ... whatever it is, it an annoyance that there is…
    in Defined Printer Limits Comment by gathur November 2018
  • probably.  No idea why Cura was doing that!
    in Defined Printer Limits Comment by gathur September 2018
  • Just for reference I am putting here the GCode heading of the old and new profiles of the same print. Old profile: ;FLAVOR:Marlin;TIME:26645;Filament used: 45.4035m;Layer height: 0.25;Generated with Cura_SteamEngine 3.4.1M190 S65M104 S218M109 S218…
    in Defined Printer Limits Comment by gathur September 2018
  • I performed an update (and had also set Xmin and Ymin to 0 previously).  The warning suddenly disappeared for most prints.  I do not believe the update was related but maybe because the server had to restart made a change. I also re-entered a new p…
    in Defined Printer Limits Comment by gathur September 2018
  • I confirm that Xmin Ymin did not change anything with regard to print limits warning (and they were autodetected values)
    in Defined Printer Limits Comment by gathur September 2018
  • Here is a quick screenshot.  Any Gcode does not fit. Probably something is wrong in the configuration but I can not what (screenshot of config also attached). Printer is CR10s
    in Defined Printer Limits Comment by gathur September 2018
  • I have the same problem and I am not extruding outside the print area.  If it warns users without a valid reason it means that the checking is not made correctly and it is a bug not a feature.  Of course there ere way around it but the most straight…
    in Defined Printer Limits Comment by gathur September 2018