francesco78

Comments

• OK, I will then enable the ping-pong mode, provoke the error (it is actually easy to do on my setup) and post you the logs.For my information, is this issue a known one, or maybe even an unsupported use case? Or is probably my specific setup the rea…

  in When printing from SD, my Prusa MK3s’s randomly stop Comment by francesco78 April 2021
• Yes, they are set by ID, so each one of them differ.What do you suggest to do to understand why the problem occurs? Should I activate "ping-pong mode"? Are there any other tests you would like me to do?

  in When printing from SD, my Prusa MK3s’s randomly stop Comment by francesco78 April 2021
• that is strange. It looks like it accepting M105 with line 162 and when sending line 163 prusa says last line was 61. Resends are taken as error so in the end server disconnects it, reconnects and resets prusa with this. As said, I have 4 printers …

  in When printing from SD, my Prusa MK3s’s randomly stop Comment by francesco78 April 2021
• Hi! I can check the buffer size setting, but I can't find where the option is. Can you tell me?

  in When printing from SD, my Prusa MK3s’s randomly stop Comment by francesco78 April 2021
• And here is the log from the "console" window. Different occurrence than the logs above, but same behavior.The print was interrupted at the exact same moment.The print stops at the line in bold: Mesg:17:56:47.098: Buffer used:14 Enforced free byte:0…

  in When printing from SD, my Prusa MK3s’s randomly stop Comment by francesco78 April 2021
• I had another occurrence, and now I am quite sure that the print stops at the lines in bold below: Send:17:29:33.318: N16 M105 Recv:17:29:33.330: ok T:209.2 /0.0 B:59.9 /0.0 T0:209.2 /0.0 @:0 B@:0 P:38.6 A:41.2 Send:17:29:34.322: N17 M105 Recv:17:29…

  in When printing from SD, my Prusa MK3s’s randomly stop Comment by francesco78 April 2021
• Here we go, I think I had one occurrence logged in the "connected" log file: Recv:17:19:31.521: tmc2130_goto_step 1 33 2 1000 Recv:17:19:31.579: tmc2130_home_exit tmc2130_sg_homing_axes_mask=0x02 Recv:17:19:33.267: echo:busy: processing Recv:17:19:…

  in When printing from SD, my Prusa MK3s’s randomly stop Comment by francesco78 April 2021
• OK, I see. Repetier said: I also need to know which printer failed when. error: Reading serial conection failed: End of file. Closing connection. means linux did close the port. Can be because you removed usb manually or because there were po…

  in When printing from SD, my Prusa MK3s’s randomly stop Comment by francesco78 April 2021
• Here are the server logs. That day, we had repeated failures trying to print from SD with the USB cable connected to the printer. 2021-04-15 14:32:47: Port closed for Prusa MK3S 3 - Doris 2021-04-15 14:32:47: Connection closed: Prusa MK3S 3 - Doris…

  in When printing from SD, my Prusa MK3s’s randomly stop Comment by francesco78 April 2021
• Thanks! I'll check all that.

  in When printing from SD, my Prusa MK3s’s randomly stop Comment by francesco78 April 2021