davidmb213

Comments

• Ok,  re-compiled with watchdog disabled ( I have independant hardware that prevents thermal runaway ), machine now homes without reseting.  Now just need to work out how to define the probe grid used by G33,  seems to be preset to always probe a 200…

  in Just upgraded from firmware 0.92.9 to 1.0.2 Comment by davidmb213 June 2018
• Thankyou for your response,  just re-flashed the 1.0.2 version and carried out a check,  yes it does look like it is the watchdog that is causing the reset,  see snip of log from Repetier Server below.  So the watchdog is not getting fired/reset in …

  in Just upgraded from firmware 0.92.9 to 1.0.2 Comment by davidmb213 June 2018
• Thank you, I'll look into using the API.

  in serial port access to printer through repetier server Comment by davidmb213 June 2018
• Is it possible to intercept the 'Printer Activate', 'Printer De-Activate' commands from the Repetier Server Web GUI in order to run a number of commands on the Repetier Server host,  the printer I have designed has a number of electrical subsystems …

  in Printer power control Comment by davidmb213 March 2017
• Many thanks for the quick reply,  I will look into this. Kindest Regards.

  in Printer power control Comment by davidmb213 March 2017
• Hi,  thank you for the reply,  I now have this working correctly.

  in Render window only displays positive quadrant of model. Comment by davidmb213 July 2016