cropduster
About
- Username
- cropduster
- Joined
- Visits
- 30
- Last Active
- Roles
- Member
Comments
-
Ok, dann probiere ich das mal die Tage. Danke
-
ehrlich gesagt keine Ahnung, was ich für das Ansteuern des Bambulab X1C braiuche, darum ging es mir. Ich habe leider keine Erfahrung mit MQTT.
-
aha...okay... ich hatte MQTT aktiviert, aber es tat sich nichts, und man musste m.E.n einige Daten wie IP eingeben. MQTT hat sich aber auch wieder deaktiviert, aber da smus sich mal austesten.
-
Wo ist denn mal für Anfänger beschrieben, wie man den MQTT Kram einstellt für die Kommunikation mit dem BambuLab Drucker?
-
printing works now.... so that seems to befinde
-
I still have odd behaviour. I didn't try printing with my already configured klipper printer, but I do get undervoltage messages and reboots when I tried to change display settings. Never had this happened before. But I will do a flow calibration to…
-
Repetier said: Good news, I could find the dead lock myself and it should now work. great!! I will try it out tomorrow and let you know!
-
I could upgrade to 1.5.0 again and try to reproduce it. Just need to know which outputs you need to debug. I will be able to do it on Friday as I am on a business trip ;-)
-
As I received my bambulab X1 Carbon printer, would you rather recommend the most recent nightly version?
-
I downloaded the dev version on January 2. unfortunately I did not check any logfiles or console outputs by the time. The print stalled upon hitting print... I heated up, but it never actually started printing.
-
Danke!! Ich habe das dann auch so geschafft, nachdem ich den Download-Server und den Dateinamen hatte, über wget https:// und sudo dpkg -i die Dev-Version installiert. Server läuft und Auswahl ist da! Danke für deinen Support und frohes Neues.
-
mir fehlt das Script installDev wie es scheint
-
hmm...das mit installDev klappt bei mir nicht. als user pi oder root, in einem bestimmten Verzeichnis? Unter /usr/bin gibt es installLatestServer … direkt über installNightlyRepetier …. kann es das sein? Komisch dass es bei den anderen funzt.
-
Auf einem Raspi 3B und deinem Image für Buster. Frisch aufgesetzt und alles erstmal aktualisiert, am Ende die Sicherungen eingespielt. Aber auch manuell erstellte Drucker lassen sich nicht löschen, nur deaktivieren.
-
any update on a better Klipper integration ?
-
Danke! Ich könnte doch theoretisch auch denselben Drucker einrichten, einmal mit Klipper und einmal mit Marlin, und jeweils den einen deaktivieren, wenn ich ihn in den einen oder anderen Modus laufen lasse, oder? Hintergrund: Wenn ich mit Klipper …
-
Frage: Kann ich mit Repetier Server Klipper mit einem Drucker betreiben und zwei oder mehrere weitere mit Marlin? Ich würde gerne an einem meiner drei Drucker Klipper ausprobieren. Alle drei Drucker laufen mit SKR1.4 Board.
-
Danke.... die Auswahl TCP/IP bei der Einrichtung hatte ich nicht nehr auf dem Schirm! Too
-
After upgrading to 1.0.1 I also did the comm rest and interestingly I had better results with 255 instead of the default 127, but I am using the SKR 1.4 Turbo board and the Pro version running on 32-bit Raaspberyy pi 3b.
-
So, I have solved my issues: The root cause for my inconsisent bltouch behaviour was a loose signal cable connection :-/ no software issue. Strange how some occurrences coincident.
-
So it really seems to be related to my Bear SKR printer. This has a BLtouch issue. The Ender 3 SKR with a Hemera and Bltouch works fine. Not sure where this Bltouch issue on my Bear comes from :-/
-
Repetier said: Server is just sending gcodes. So that sounds more like a firmware issue than a server problem. Except if you see in console extra commands like deploy being send. Enable commands in console to see what gets actually really sen…
-
I had it running well on 0.94.3, retried 1.0.1. and had already an issue with screen resolution, connectivity and strangely enough UBL bed probing. That should not be connected with UBL, but I am puzzled, just after the upgrade my printer behaves st…
-
Repetier said: Is this meant to happen with that firmware? I mean M119 should show status of pin but not stow/deploy a pin. That is correct in marlin and it just works when everything is fine. However, when I experience "my issue", the M1…
-
Repetier said: Is this meant to happen with that firmware? I mean M119 should show status of pin but not stow/deploy a pin. At least that is how we do it in repetier firmware. Have no marlin with that. We only deploy when we want to measure. …
-
Hi, I have a normal 1.4 and a 1.4 turbo, but it didn‘t work for me. I don‘t know here the file went, Repetier confirmed the upload, but checking the sd card, nothing was there.
-
I went back to 0.94.3, but on one of my printer, a Bear SKR printer, I have the issue, that ftare a successful print, a new print leads to the nozzle crashing into the bed. When sending M119 via the console, the pint deploys from stowed mode and the…
-
my ender seems to be better off... I run a SKR 1.4 on it, and in my crashed Bear the turbo version. I didn‘t get that severe issue son my Ender.
-
wow, that‘s bad.... I just have a punctured textured steelsheet. but not sure what cracks I got on my x ends .. they were severly bending. After similar issues I use to perform sone bltouch homing tests above the bed to make sure nothing is br…
-
I see from the change log that some communication timeout and resend optimzation might have contributed to my issues when I needed to stop the printer by power switch.