chrismolloy
About
- Username
- chrismolloy
- Joined
- Visits
- 14
- Last Active
- Roles
- Member
Comments
-
does anyone look at these?
-
M104 with no parameters works. eliminates turning off extruder.
-
So, if I want to stay at the current temperature, what gcode do I put in End Gcode script? The temperature is dependent on the filament that is in use.
-
I have checked the follwing for the offending gcode: Repetier Printer Start and End gCode Slic3r Configuration Start and End gcode Slic3r Configuration Filament Start and End gcode I am still getting M104 S0 ; set temperatureM140 S0 ; set bed temp…
-
I have no scripts in the SLIc3R Configuration. The scripts I have in the Repetier end code is commented and shows upas show up as ;FROM PRINTER END CODE I am still getting M104 S0 ; set temperatureM140 S0 ; set bed temperature at the end of the …
-
here is the code generated. ( are my comments added to code M107 ; disable fan; Filament-specific end gcode (- this is my tag in my filament specific gcode, whisc is none);END gcode for filament ;FROM PRINTER END CODE (- this is my…
-
here is the code generated. ( are my comments added to code M107 ; disable fan; Filament-specific end gcode (- this is my tag in my filament specific gcode, whisc is none);END gcode for filament ;FROM PRINTER END CODE (- this is my…
-
No. It appears to be generated by Slic3r. Anywhere I have gcode, I have tagged it with text specifying its origin. I am using Repetier Host, and Slic3r that comes with it.
-
There is no custom gcodes
-
I slice all the time while printing. rarely causes a minor stutter. never ruins a print. I have a very fast machine. so it is a bug that you can press print in the preview screen while it is printing?
-
sorry, I have no experience with auto levelling. Have you levelled the bed manually first?
-
What does it do when you home the x axis? does it mover at all?
-
check your microswitch. should be using the normally closed contacts
-
What does it do if you home x does it move, move a bit in the wrong direction?
-
Marlin firmware Version 1.0.2 on a Geeetech Pro C Dual extruder printer.