› ›

cagdas

About

Username
cagdas
Joined
Visits
1
Last Active
Roles
Member

Comments

  • Repetier said: You need to consider that your z probe is 20mm to the right, so it needs to move 20mm left. Make sure start position is at least x=20 to activate. Also make sure xy area for probing fits into reachable positions with that offse…
    in Enable Z-probing Comment by cagdas June 2020
  • 09:19:45.847 : Info:Autoleveling disabled09:19:50.238 : Z-probe:0.607 X:20.00 Y:0.0009:19:53.238 : Z-probe:0.457 X:20.00 Y:45.0009:19:56.072 : Z-probe:0.312 X:20.00 Y:90.0009:19:58.868 : Z-probe:0.248 X:20.00 Y:135.0009:20:01.595 : Z-probe:0.190 X:2…
    in Enable Z-probing Comment by cagdas June 2020
  • Repetier said: And why don't you tell us what error you get and during which operation and what exactly you did :-) G32 Could not activate z-probe offset due to coordinate constraints - result is inaccurate
    in Enable Z-probing Comment by cagdas June 2020
  • Language Baudrate Filament printed Printer active Max. inactive time Stop stepper after inactivity X-axis steps per mm Y-axis steps per mm Z-axis steps per mm X-axis max. feedrate Y-axis max. feedrate Z-axis max. feedrate X-axis homing feedrate Y-a…
    in Enable Z-probing Comment by cagdas June 2020