billy_grigg
About
- Username
- billy_grigg
- Joined
- Visits
- 4
- Last Active
- Roles
- Member
Comments
-
I have a Tronxy P802E-8 with one extruder and a heat bed. M303 P0 S190 X0 R4 C0 Would calibrate EXTRUDER PID to 190 degrees, save results to EEPROM, Check 4 cycles,use classic method. M303 P1 S55 X0 R6 C2 Would calibrate BED PID to 55 degrees, sav…