axelsp
About
- Username
- axelsp
- Joined
- Visits
- 26
- Last Active
- Roles
- Member
Comments
-
As for temperature, when I remove aluminium plate and attach a glass sheet, I can reach 110c, but with the aluminium, I can't go over 85-90 or so. I installed a PEI sheet on top of the aluminium, and for that 85c seems to be enough to print ABS with…
-
Original firmware has an error in thermistor table, yes, pretty annoying. I have checked the temperature table with IR thermometer, it is spot on. I burn my firmware with an USBASP, but I'm fairly sure they come from the seller with the Arduino boot…
-
There's an unused (as far as I can tell) pin on the connector connected to A4, I've been considering putting something fun there. I never really use the buttons though,
-
Didn't really look for it, but I don't think they were there to begin with. These are what I based it on:https://www.dropbox.com/s/y9cdsw7ty7q4pvb/fwsource.rar?dl=0
-
Think this is the same as the other thread, in which case:Working 0.92.5:https://www.dropbox.com/s/e9vy384ock79tto/Repetier-Firmware-5keys.rar?dl=0 Old 0.91 source (Thanks Mixanoid) :https://www.dropbox.com/s/e9vy384ock79tto/Repetier-Firmware-5keys…
-
Finally got it to work, see modified.txt in .rar file to see what I had to change. Thanks to Mixanoid for the 0.91 source! Confirmed to work on Melzi 2.0 with XI3 from Hesine on Aliexpress. 0.92.5 with working display/keys.https://www.dropbox.com/s/…
-
How do the pins "translate" from real pins to pin numbers used in the file? Referencing the Melzi design files with traces on the board, this is what I got it to look like: http://i.imgur.com/RH5W4OA.png Pin names taken from JP16 of the Melzi board…
-
I e-mailed the seller (Hesine @AliExpress) and he sent me the firmware a few days ago. However, there seems to be no display configuration there, but the .hex file supplied is exactly what the printer shipped with. I uploaded the .zip file sent to m…