› ›

allen_g30

About

Username
allen_g30
Joined
Visits
22
Last Active
Roles
Member

Comments

  • MartinH said: Some changes you need are ….. thank you. I will try tomorrow
    in 2 problems. need help Comment by allen_g30 December 2018
  • /*     This file is part of Repetier-Firmware.    Repetier-Firmware is free software: you can redistribute it and/or modify     it under the terms of the GNU General Public License as published by     the Free Software Foundation, either version 3 o…
    in 2 problems. need help Comment by allen_g30 November 2018
  • this is last setup. work fine // #################### Z-Probing #####################//#define Z_PROBE_PIN 63 #define Z_PROBE_Z_OFFSET 0 #define Z_PROBE_Z_OFFSET_MODE 0 #define UI_BED_COATING 0 #define FEATURE_Z_PROBE 1 #define Z_PROBE_BED_DISTANCE…
    in Z-Probe error Comment by allen_g30 November 2018
  • Hello I have the same problem. when I pause (print from sdcard), the head moves back on the y-axis and strikes badly in the belt. below the configuration in sdcard.cpp void SDCard::pausePrint(bool intern) {     if(!sd.sdactive) return;     sdmode =…
    in Help with SD-Pause position and behavior Comment by allen_g30 February 2018
  • thank you very much. now I am trying new settings
    in Filament change script ? Comment by allen_g30 December 2017
  • Hello everybody. I come back with the following problem: after an upgrade made to diagonal rod and modified some cables, I started to have problems with the printer, namely randomly shifting the layers. below images. I went to V1 repetier firmware. …
    in Filament change script ? Comment by allen_g30 December 2017
  • Repetier said: First thing I see is using old firmware version 0,.92. Not sur eif it gets much better in 1.0 but we fixed so many things I can not say if there was something related. hello. where find firmware v1.0?  i find only 0.92.9 (h…
    in Filament change script ? Comment by allen_g30 December 2017
  • thank you. i use Repetier-Firmware configuration tool for version 0.92.9, and i set #define ENDSTOP_Z_BACK_ON_HOME 20  #define FILAMENTCHANGE_X_POS 10 #define FILAMENTCHANGE_Y_POS 0 #define FILAMENTCHANGE_Z_ADD  10  problem with change filament an…
    in Filament change script ? Comment by allen_g30 October 2017
  • and, when i put the pause what is wrong? thank you for your patience and excuse the insistence, but it ends me mentally.
    in Filament change script ? Comment by allen_g30 October 2017
  • and config.h https://drive.google.com/open?id=0BwH6y8HZh5vFcEVOS3N3c0xNeHc
    in Filament change script ? Comment by allen_g30 October 2017
  • this is video with crazy printer:(
    in Filament change script ? Comment by allen_g30 October 2017
  • after reaching the end stop, the car descends 3mm. I'll make a movie when I get home.
    in Filament change script ? Comment by allen_g30 October 2017
  • Repetier said: On deltas I would always home after a filament change. If you move position while changing the firmware ha sno chance to detect this, but homing corrects that. Thanks for the reply. at the change of filament, the head automa…
    in Filament change script ? Comment by allen_g30 October 2017
  • hello people. i have a Kossel delta printer, and i have a litle problem: Pausing the print and then changing the filament does something where the printhead starts again forward of where it is supposed to start. Layer shifting x with -, and y …
    in Filament change script ? Comment by allen_g30 October 2017