› ›

Vaz

About

Username
Vaz
Joined
Visits
3
Last Active
Roles
Member

Comments

  • SOLVED: Turns out the problem was my USB cable. I've changed the cable and it all works. Bus 001 Device 007: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapterBus 001 Device 008: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapterBus…
    in Advice on setup of small print farm Comment by Vaz December 2020
  • pi@server2:~ $ lsusbBus 001 Device 004: ID 0424:7800 Standard Microsystems Corp.Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 HubBus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 HubBus 001 Device 001: ID 1d…
    in Advice on setup of small print farm Comment by Vaz December 2020
  • Sorry, just to clarify. I have connected the printer to it but it does not appear 
    in Advice on setup of small print farm Comment by Vaz December 2020
  • Repetier said: Do you see the connection in /dev/serial/by-path or by-id? If not linux does not see the device or does not have serial support for that type. In that case check with lsusb if linux sees the usb device at all and what type it i…
    in Advice on setup of small print farm Comment by Vaz December 2020
  • Repetier said: Yes, you do exactly that. Just you should rename the old pis name to something else. There can be only one repetier-server.local so change the host name on the old one to something you like. Or use ip which always works. Hi,…
    in Advice on setup of small print farm Comment by Vaz December 2020
  • Repetier said: Yes, that works in general. Only when you have webcams with too high resolution/frame rates or power problems that gets a problem. Every pi needs one license so 2 in total leaving 3 free licenses. Hi, How do I actually se…
    in Advice on setup of small print farm Comment by Vaz December 2020
  • Ah, that makes sense. Thank you for your explanation. 
    in Why do the graphs for my printers look like this? Comment by Vaz November 2020