VasyaF
About
- Username
- VasyaF
- Joined
- Visits
- 0
- Last Active
- Roles
- Member
Comments
-
I tested it today. When printing the perimeter at a speed of 7 mm/s with the values MAX_TRAVEL_ACCELERATION 1000 and MAX_JERK 20, pauses are present when printing. I lowered MAX_TRAVEL_ACCELERATION to 500 in increments of 100, the number and intensi…
-
Is that a question? Or is the question mark wrong? Can I fix the firmware to print at lower speeds? You can tell me where to fix it. I want to get at least 5 mm/s for printing small parts.
-
#define XAXIS_STEPS_PER_MM 91.4286 #define YAXIS_STEPS_PER_MM 91.4286 #define MAX_ACCELERATION_UNITS_PER_SQ_SECOND_X 1000 #define MAX_ACCELERATION_UNITS_PER_SQ_SECOND_Y 1000 #define MAX_TRAVEL_ACCELERATION_UNITS_PER_SQ_SECOND_X 1000 #define MAX_TRAV…
-
When the MAX_JERK value is reduced to 10 mm/s, the pauses appear only at speeds up to 4 mm/s. when the MAX_JERK value is increased to 30-40 mm/s, the pauses become longer and more noticeable. This can be seen in the video on the belt and head. And y…
-
New video: Pauses are visible and audible at 0:04-0:05 seconds. https://yadi.sk/i/6LnPc5kJ3msrHA
-
I marked the swells in the photos. For 1 video: https://yadi.sk/i/gS2dq4fyVqDdmQ For 2 video: https://yadi.sk/i/TmtUV-Xy4cjptg
-
In the first video, you can clearly hear the sound of pauses from 0: 07 to 0: 10 and from 0:15 to 0:18 seconds. The second video is clearly audible and visible at 0: 13 seconds. A split-second pause occurs not only on the movement of the head, but a…
-
The problem is only on firmware 1.0.3 and 1.0.4. On version 0.92.3 everything moves smoothly in all configurations. Video: https://yadi.sk/i/IwIKoW_k0sQHhg https://yadi.sk/i/dr4JgORC8_prgg Photo: https://yadi.sk/i/Owd56LmgtNIJGw https://yadi.sk/i/…