TROT84
About
- Username
- TROT84
- Joined
- Visits
- 1
- Last Active
- Roles
- Member
Comments
-
Yes! thank you. it was set to 200x200x100 now every thing prints in the center as it should be. Now can you tell me if I can use a glass bed? with this auto leave, will it ?work with glass? Not sure if you are just the software technicians, or d…
-
ok another day or 2 I hope I get this thing working. Here is where i am at. still trying to figure out this position thing out, not sure what you mean about this ---> " After homing send G1 X0 Y0 and see where extruder is. In host there is a cir…
-
ok now we are getting closer. I am now using CuraEngine for slicing, no more ghost prints, now even after re-installing the software. When I goto print, it looks good and center on the computer but when it prints on the bed, it to the right of ce…
-
ok now we are getting closer. I am now using CuraEngine for slicing, no more ghost prints, now even after re-installing the software. When I goto print, it looks good and center on the computer but when it prints on the bed, it to the right of ce…
-
ok tried a few settings but did not get anywhere , So I un- installed everything and started up again. so during the re-install I ran in to the same two files I ran into the first time. " RepetierServer " and " FreeImage.dll " . so after removin…
-
This is what comes up after slicing. then when I try to look at the Gcode its not there. I kinda find it here.--->>. in the file "composition. thank you so much for helping me would love this working before Christmas , would like to take it…
-
This is the one i just got https://www.ebay.com/itm/Monoprice-Select-Mini-Pro-3D-Printer-Aluminum-Auto-Level-Heated-Removable-Bed/372389357306?epid=10022075487&hash=item56b422a6fa:g:0G0AAOSwq2xcFMLf:rk:1:pf:0 it does all
-
still having trouble, I loaded some abs on here, set the extruder at 250 and the bed at 110. the extruder got the 250 with no problem but the max the bed it got was 64.80 . Even after it running 40 min. could not get any hotter. I really love …
-
Well after pulling my hair out this is what I found so far. after slicing it would say it cant find the file, so as I looked for it and I found here, well sorta . C:\Users\john\AppData\Local\RepetierHost. it was called "composition" but that did no…
-
well this is something like what happens to me. I get it on connect and when i try to print but it says like 20 times in a row , then says, echo:endstops hit: z:-0.04. then says this again, Warning missed line detected - correcting buffer usage.…
-
mtl302 said: Repetier said: If it only happens on connect and afterwards you can commands just normally simply ignore it. Connection is a bit critical as it resets the printer and might have send before and after reset some data so suc…