TK3d
About
- Username
- TK3d
- Joined
- Visits
- 3
- Last Active
- Roles
- Member
Comments
-
Yes, that´s all. The only difference between a good resume (with normal printing till end) and a failed resume, is the time between pause and resume. A short wait works, a long wait fails.....
-
I´m sorry, that was not scientific accurate enough. But the guess was wright. Today I had the right thought to verify that:The two print files (good and fail) contain the exact same commands, because it was the same Printfile. Every entire Command i…
-
Only if the printer thinks the commands (moves) are worked off he accepts the next command, if you look how frequentliy this happens, you see how fast this is. It´s the same 3D Object. In the good print log file eg. 10 worked off Commands last a fe…
-
Yes, the time between two commands has nothing to do with extrusion speed. Thats clear to me. And it is clear to me that the Printer fills its buffer and then works off command for command. But over a longer period (a second or longer) you can look …
-
You can see a totaly different Extrusion Speed in the Log if you compare before and after pause. Printing before pause e.g.:Time: 19:36:06.357 E4.897 Time: 19:36:08.869 E7.698 Difference about 1,8mm per second Printing after pause e.g.: Time: 20:0…
-
Tested with following changes: - deleted the second Webcam (-> No change in behavior)- changed to absolut extrusion (thought this could be the reason, because (I think) Repetierserver sends a G92 Exxx Command after Pause. I think this could end …
-
You are right, there was an not available webcam 2 in the config. I was not aware of this. Removed it from Server Config. I try tomorrow if it changes something in the behavior. Second, i checked the Gcode, there is nowhere "G1 F7800". Also in the e…
-
Sorry, I tried to upload the files several times. I seems to work, but after "Save Draft" the files are lost. I generated a download link ( I don´t think its a good idea to post the whole two files in Text). https://gofile.io/?c=4s2Byy
-
I can not upload the two files. Here is the zipped File with the two logs
-
Now I generate two Demo Files, which are showing the different behaviors. I sliced a 20mm CalCube with Slic3r and Repetier Host an added an "@pause" Request at Height 0,45mm and preheated the Printer. - The File marked as Good startet printing an…
-
I tried to generate two files with a fail and a good result. But I can not figure out what the error causes. I try to make better files which show the problem clearer..... .
-
Thanks a lot! It works! Chromium changes from 51.0.2704.91 to 56.0.2924.84 But Raspbian is still Jessie: pi@RepetierServer:~ $ lsb_release -a No LSB modules are available. Distributor ID: Raspbian Description: Raspbian GNU/Linux 8.0 (jessie) Rel…
-
Me too. Exactly the same...
-
Is it possible that the problem only occurs on servers with german as language? (My Printer is printing at the moment so I can not try it).
-
I don´t know what ass is, but I logged in with ssh (typing error??) and made an screenshot of the list. I found no difference.The Raspberry was shut down before powering off.