Sonicboom
About
- Username
- Sonicboom
- Joined
- Visits
- 5
- Last Active
- Roles
- Member
Comments
-
Thank you, testing this now, no that is not my actual link, that's why it has the word fake embedded, but thank you for the info either way. No matter what i do, it won't work. I have corrected the link and included the key from the documentati…
-
I registered my Kasa device with IFTTT, grabbed the link after adding the webhook integration to Kasa-TP Link. @webAction https://ifttt.com/applets/2Zf4a5ke-if-maker-event-power_off-then-turn-on-hornet-3d-ep10-us In RS i added a new Web Action as P…
-
this https://plugins.octoprint.org/plugins/tplinksmartplug/
-
@umtauscher if both are on the same circuit, you can maybe add one of the Kasa Smart Plugs dedicated to the printer, then you can first shut off the plug to the printer and then the server. That is how i have mine setup and trying to get it to wor…
-
@umtauscher Yes, this is the automation i have working currently in Klipper, I also have a small program in Linux that shuts down the computer at a certain time, i only used it for my late night prints. It runs off the Idle timeout period. [gcod…
-
If i understood the translation correctly, i think this is what i was looking for as well,. except i was using fluidd. However there are a few config's i still want to use, like led_progress.cfg and Printer_plug.cfg. so adding those to the Repetier…
-
will HA turn off and on my Kasa Smart plug or is this just so Alexa can tell me the print finished?
-
So i "after 3 attempts" successfully finished a print with Repetier. Question. Even though the print finished i still got an error that the print did not complete because it had to home first. so that raises my question, If i have my end script in…
-
unfortunately the IFTTT website is probably one of the most confusing websites i have ever been to, worse than Klipper. it's like one applet connecting to another and another and another...i'll just go back to a pushover notification and i'll turn i…
-
you my friend are a life saver. that is exactly what i needed. Is there no way to show the Move window in server during a print? that is really all that is needed. I see that i can move it in minute increments from the GUI but soon as a print start…
-
just started my first Klipper/Repetier print and so far so good, went through each setting and so far only two things need work, one is i would like to somehow enable babystepping or at least the option to move Z during a print and have it saved. t…
-
SO i started fresh and was able to copy the files into the database/Klipper directory, unfortunately some of the Documentation does not match up with the new version, i.e. Auto Detect is not in the drop down. so the error now mcu 'mcu': Command f…
-
So i have a small error about my led_progress.cfg file that is missing from /var/lib/Repetier-Server/database/klipper.Is there a way i can either import it or paste it into that directory? remember i already have a working Klipper and Fluidd front …
-
hah! that did it!, i didn't care too much about settings since it's a fresh install but first part fixed it. Thank you kindly!
-
you are correct,. unfortunately i get the same error, boost::filesystem::status: Permission denied [system:13]: "/home/jaime/ffmpeg" is there no way to add the path to the xml for it or a way to delete the config so i can start fresh with new optio…
-
so i can't uninstall., can't launch, can't edit permissions, reinstall says same version is already installed even after i removed it. it is looking at ffmpeg in home/jaime/ffmpeg but i have one installed in /usr/bin/ffmpeg
-
so i can't start server to change the ffmpeg location
-
Reading server settings...9:50:07.387: Repetier-Server 1.4.19:50:07.387: Webdirectory: /usr/local/Repetier-Server/www/9:50:07.387: Storage directory: /var/lib/Repetier-Server/9:50:07.387: Configuration file: /usr/local/Repetier-Server/etc/RepetierSe…
-
locale::facet::_S_create_c_locale name not valid all i notice is RepetierServer.xml has a lock symbol on it, not sure it matters though.
-
I installed Repetier-Server-1.4.1-Linux.deb and Repetier-Host-x86_64-2.2.4.AppImage, i am running it on an Intel 64bit pc running Linux Mint ps aux | grep tier 9625 0.0 0.0 9076 2296 pts/0 S+ 10:26 0:00 grep --color=auto tier~ Repetier…
-
This site can’t be reached127.0.0.1 refused to connect. is what i get
-
That's it, i can't get server to show up in host, nor can i get server to open after it is installed. i did some digging and found the command to run to see if server is running and i do not see the xml file in the command
-
So i installed Repetier-Server-1.4.1-Linux.deb on an Intel 64bit device, however when i start the server via command nothing happens. it is not even listed in the Repetier Host
-
ok thank you, i already have Klipper installed on the printer, do i still need to flash the MCU through Repetier or can i just connect to the same USB port and take it from there?
-
yea, i do not want it to wait, since i do UBL and tilt the mesh before printing along with prime line, i prefer not to wait for nozzle to heat up. but thanks, checking out link now, also per Marlinfw.org, M104 - Set a new target hot end temperature…
-
RAyWB said: Think there is still a mistake as at the beginning you just want to lift z by 5mm and bring extruder to another position.doing this by relative move is ok for z but as i guess you never know where x and y are (may be close to pr…
-
RAyWB said: G90 ; Absolute PositioningG0 E-4 f3000 ; retract 3mm of filament Think you should add a G92 E0 beforeG0 E-4 f3000 or place the G90 after G0 E-4 f3000 Thanks, this is what i have now, seems much better, not sure what was c…
-
i did correct the G0 E-4 to G1 E-4 as well as the redundant G1 in part removal.
-
Hello, yes Run after Job is blank and Run if job is aborted has my end gcode, maybe that is the issue? should i just use @stopPrint? problem is if i cancel the print something has gone wrong so i probably want the nozzle to move up and out of the w…
-
Ok, I will give that a shot tonight, thank you for responding