Scottty
About
- Username
- Scottty
- Joined
- Visits
- 23
- Last Active
- Roles
- Member
Comments
-
I really would start to reach manual control of BLTouch using the M340 P0 commands as step 1.There are the least preconditions.As far as I know only two:#define FEATURE_SERVO 1 #define SERVO0_PIN 5the Pin number depends on your board and where you w…
-
several months ago i installed a BLTouch using the ramps board and repetier firmware.Used BLTouch as Z-Min. The first step is hardware connection: wiring: 3-pin cable: brown-> GND, red -> 5V, Orange - servo pin of board2-pin cable: black ->…
-
Updated to stretch finally helped with the server icons.Have now Raspian 9.8, chromium 65.0..... @Falcon20xx: thanks for the link! There are just 2 things open to come to former functionality and comfort:- I can't get WLAN working any more. LAN is …
-
Since the update helped cosmovave andTK3d, I updated again. But the problem is still there. Maybe the difference is the touchscreen: I have a 7 inch 1024 x 600 waveshare touchscreen, which needs another font size? So it seems i have to upgrade to th…
-
I run all the updates: lsb_release shows the same as before.Chromium changed from 51 to 56: Chromium 56.0.2924.84 Built on Ubuntu 14.04, running on Raspbian 8.0. And the strange symbols - sorry to say - are still there.Calling the Touch GUI from PC…
-
pi@RepetierServerV086:~ $ lsb_release -aNo LSB modules are available. Distributor ID: Raspbian Description: Raspbian GNU/Linux 8.0 (jessie) Release: 8.0 Codename: jessie
-
Here are some more data: 1) Server Version 0.86.2 (Raspberry Version) I regularly just switch off (since 3 years), never did shutdown. (Good luck so far?) 2) At my printer the problem happened to start on march 15th, not at first boot on thi…
-
Have the same problem since today, Version 0.86.2.This version is installed sind march 2018. Compared to the fontlist the ...webfont.woff2 is missing. But also missing in /usr/local/Repetier-Server/www/modules/front2/www/fonts, so probably this font…
-
Thanks again for your hint. I digged a bit into the called probing functions and found an interesting thing which makes the proposed “moving the head to the center of the bed” unnecessary in my mind. Like stated already, I’m no programmer, so…
-
Thank you for your quick reply! Yes, I know G32. Just startet step by step, testing and adjusting parameters, G29 before G32 and 33. And I already experienced those connections you are talking about;-) For avoiding the danger the head crashing into…