Saamec

Comments

•    Thank you!!!!! 

  in detect the jam Comment by Saamec October 2017
• EVENT_JAM_DETECTED_END   by itself will not work, probably it is necessary to specify in other code where it will be called? or is it already somewhere written? event code is processed, so it should specify in the printer.ccp? Your code will certain…

  in detect the jam Comment by Saamec October 2017
• Make all relays. Solder the wires from the extruder 8 in a bundle, and computerwide after sealing each. The same with the thermistor. And use the M42 P(pin) S255 M42 or P(pin) S0. Like that's it))

  in Trying to use 8 extruders with one driver Comment by Saamec October 2017
• All the best to you!

  in The firmware does not allow to print objects of more than 500 mm Comment by Saamec April 2017
• Thank you, as will test - will tell you about it)) Thank you!!

  in The firmware does not allow to print objects of more than 500 mm Comment by Saamec April 2017