› ›

PxT

About

Username
PxT
Joined
Visits
16
Last Active
Roles
Member

Comments

  • Thanks, I'll fix that. Is there anywhere I should change the offset you mentioned so that I don't have to specify P0?
    in G30 doesn't reverse properly Comment by PxT February 2016
  • You can try my (experimental) Configuration.h file from here:https://github.com/PxT/Repetier-Firmware/tree/work092 Z-probing doesn't work yet, but everything else should be pretty close. Let me know if you find something that is not working. Use at…
    in 0.92.8 for Rostock Max V2 Comment by PxT February 2016
  • I did clear the eprom before updating the firmware.  With P0 the movement works as expected after triggering the probe, but the vertical travel speed both up and down is VERY slow (1 - 2 mm/s estimated). 
    in G30 doesn't reverse properly Comment by PxT February 2016
  • I should say that homing and all other manual moves work as expected.
    in G30 doesn't reverse properly Comment by PxT February 2016