Poida
About
- Username
- Poida
- Joined
- Visits
- 3
- Last Active
- Roles
- Member
Comments
-
So I'm back to Marlin as it works.
-
I have the following:#define EXT0_INVERSE 0
-
G'dayWhen it would just crash it was with 0.92. Re-doing the config with 0.91 caused the second issue. I'm not sure what you mean in your second suggestion. The plug is on correctly, because when I put Marlin back on it works fine. In ver 0.92 the e…
-
....but now the extruder motor gets HOT and doesn't extrude.
-
Now it gets interesting.I re-did the configuration using ver 0.91 R8 and now it works...????Very perculiar.
-
G'dayI've now set the max height to 50mm shorter that it actually is in order to properly look at what the distances are that are being moved as the head approaches 0.Move the head to z1 (g1 z1)Jog 0.1 and the movement is 5mm This will happen from …
-
I sent G1 z1 to take the head down imm off the bed, then clicked on the Z jog -o.i Should read: I sent G1 z1 to take the head down 1mm off the bed, then clicked on the Z jog -0.1 Sorry about that - I hate typing on an iPad!
-
G'dayThanks for pointing out what I'd done wrong with the grid - I had P1 in front of tower A (-103.92; -69.28), P2 in front of tower C (0; 135) and P3 in front of tower B (103.92; -69.28) - hence the parallelogram that was protruding in front of th…
-
In relation to the auto level - My bed is 270 diameter. What would you recommend I put in for the P1, P2 & P3? Ideally I want it to do a grid, and thought I had set that up....CheersPete
-
G'dayThanks for the response. I do understand that Marlin and Repetier do things in subtly (and sometimes, hugely) different ways. I'm only hopping back to Marlin to try to understand the differences. My intention is to stay with Repetier. That bein…
-
Oh, I should have said - The most important problem is the head crashing into the bed. Once that's sorted I'll look at what auto bed level is doing!CheersPoida
-
That link should have been:http://www.ebay.com.au/itm/RAMPS-FD-Due-R3-ARM-Board-12864-LCD-Controller-DRV8825-Driver-For-3D-Printer-/281538523044?hash=item418d00efa4:g:gZsAAOSwrklVFQmU
-
G'dayThis is one offering on eBay:http://www.ebay.com.au/sch/i.html?_odkw=arduino+due+ramps&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xdue+ramps.TRS0&_nkw=due+ramps&_sacat=0 In it's description it says that it …
-
Found the Due.... Wasn't looking for Arduino!
-
Thanks, I'm getting there now. What is a Due board? I've looked on eBay for a RADDS board but not found anything. I am definitely going to change out the board asap. After spending all this time building a big machine I'm not having it crippled by…
-
G'daySometimes I'm a plank.I had selected Min endstops when configuring..... Redone and the file is now like what I edited my "bad" one to be. Homing properly, but so slowly! Where do I set the speed? Moves in Repetier Host are also slow enough to m…
-
Now it's getting confusing. Endstops are on X, Y & Z max pins. M119 returns:21:40:57.382 : x_min:L y_min:L z_min:LI have done the following, and now zeroing works: (Mine are the "true //false" and the "false //true")#define ENDSTOP_PULLUP_X_MIN …
-
Thanks for the quick response.I am using a Mega with a RAMPS board. I have a Rumba for the other delta I'm building (with a diamond head 3 colour mixing head). I suppose the question is - will that be okay too!? It is odd that when I reinstall Ma…