Lexar
About
- Username
- Lexar
- Joined
- Visits
- 29
- Last Active
- Roles
- Member
Comments
-
it's more complicated than I thought. Is any possibility in the future integrate standard HID USB device as joystick or any jog into Host program. It will be possible send new position as G code with acknowledge and then we don't lost reference posi…
-
Firmware tells to host new position always, i see it in COM port, but Host this ignore? Simply if Host get X/Y/Z new position and Host don't send any Gcode data, then it should be acceptable as new coordinates? Or it means, that jog-wheel is usable …
-
used board RAMPS 1.4, used connector AUX2 for joystick connection. Used FW ... 0.92.8 (i hope not important). it's not perfect, but usable. Let me know if you find any improvement.. ----------------------------------------------------- add into "pi…
-
I had the same problem. It really looks easy to change it. Add new lines in code "Commands.cpp", function processGCode... for G0 speed i use X max feedrate. I hope it helps. I check it now on my miling machine. void Commands::processGCode(GCode *c…
-
ok solved, procedure set_joystick_run(); gived into "void Commands::commandLoop() {....} now it's absolutely clean and fine moving at fast and slow motion. sorry for disturbing.
-
thank you for response, but i don't use your code. This is new one. Only question on how to emulate to find problem in my code. Or maybe better to start new discusion? Thank You.
-
Hi, very good job. Again after year i try to give my 3axis analog joystick type model:OM400A-M4(button switch on top, 10k pots) into code for linear moving of my milling machine. I found good function for this in code, but after using fast speed is…
-
I increase PRINTLINE_CACHE_SIZE on 32 and it is really enough. My maximal speed of cnc is up to 1500mm/min and now it run clear and smooth! Thank you for best way to all !! BR Alexandr